Member record · ID 39044
Stuartm
15 posts recovered 2 threads started First seen 23 Mar 2018 Last seen 2 Aug 2019
Threads started
2 in the archiveRecent posts
All 15- Vfr800 vtec 2006 not starting HELP!!!!!!! Just to give you an update i checked all the fuses again and i jumped the fuel relay which made no difference at all so i pulled a plug to check for spark had that and it started first time but rough its only running on…
- Vfr800 vtec 2006 not starting HELP!!!!!!! That fuse is fine and when i had the fuel line off the fuel rail and then put it back on the bike started first time perfectly until it ran out of fuel so what I’m going to check and see if i can bypass the fuel relay…
- Vfr800 vtec 2006 not starting HELP!!!!!!! That fuse is fine and when i had the fuel line off the fuel rail and then put it back on the bike started first time perfectly until it ran out of fuel so what I’m going to check and see if i can bypass the fuel relay…
- Vfr800 vtec 2006 not starting HELP!!!!!!! Ill try the bypass and see if that works then try and figure the next one after that ill let you know how i get on and have a look at both the cam and ignition connections too thanks for just now
- Vfr800 vtec 2006 not starting HELP!!!!!!! Yes i have a Haynes manual and ill try that as this is an electrical issue some where
- Vfr800 vtec 2006 not starting HELP!!!!!!! Hi yes it runs for that few seconds every time its just when you turn it over there is no smell of fuel so there is something odd about this, i will change the relay but i dont think its that thats the problem as i…
- Vfr800 vtec 2006 not starting HELP!!!!!!! I have tried both keys and it makes no difference, side stand and clutch tried both and make no difference, the red light is the black centre of the tach needle missing. I think I’m going to jump the fuel relay and see…
- Vfr800 vtec 2006 not starting HELP!!!!!!! My bike was running perfect and i have not ridden her for a while so i went to start her and she just turns over but will not start and there is no smell of fuel. All fuses are fine engine kill is fine side stand is…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) I used an 1198 wheel with the large axle here’s a pic of the wheel the larger the offset the easier it is to fit [image: 36418B25-2580-401E-9D7A-B554588290A3.jpeg]
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) BiKenG, 5/2/2018 at 10:34 AM In that case, the goal is the wheel, but I won't be using Ducati axles and stuff. Goes against the grain on a Honda (apart from the wheel of course 🙂 ) Anyone got an accurate Ducati wheel…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) I have done the conversion using Ducati rear wheel and keeping all the original vfr components just made a new shaft to marry both together and now have a 200 rear tyre fitted. [image:…
- Centre nut rear wheel conversion CENTRE NUT REAR WHEEL CONVERSATION I have just finished manufacturing a rear wheel conversion that takes the Ducati 1198 wheel (17x6). The nice part about this conversation is that the only item changed is the rear axle…
- Single Nut Rear Axle Conversion - 6Th Gen keef, 19/08/2015 at 12:10 PM Can't say for sure since I haven't tried the 848, but probably, I belive the 749s had a smaller axle as well. I didn't even think about axle sizes, I just wanted a 6inch wheel, so went with…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) .CENTRE NUT REAR WHEEL CONVERSATION I have just finished manufacturing a rear wheel conversion that takes the Ducati 1198 wheel (17x6). The nice part about this conversation is that the only item changed is the rear…
- Single Nut Conversion Vfr800 Hrc Rc45 Style - One More:-) YoshiHNS, 09/02/2018 at 10:08 PM my rear 848 cast is 9.8 lbs IIRC [image: 322C82F7-F816-437F-AD3A-58FB26451A01.jpeg] [image: 03BF1C53-7FF1-42A8-A085-2B6DA2D5EB28.jpeg] [image: 5D90D751-AD87-4A0C-AC43-D4F2F7D512E6.jpeg]
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.