Member record · ID 17700
Fattiremike
16 posts recovered 3 threads started First seen 15 Jan 2010 Last seen 14 Mar 2010
Threads started
3 in the archiveRecent posts
All 16- 929 front end So, I got a line on a 929 USD fork, with an RC51 front wheel. The owner claims that he had this on his 97 VFR, and I am interested in putting it on my 07. I have read numerous threads here on how to do this, but almost…
- Leaking RF1000 [image: View Post]keithbob, on 25 February 2010 - 08:36 PM, said: [image: View Post]Fattiremike, on 25 February 2010 - 08:09 PM, said: [image: View Post]vfrcapn, on 25 February 2010 - 08:03 PM, said: I guess you've…
- Leaking RF1000 [image: View Post]jaimev34, on 25 February 2010 - 07:52 PM, said: If you can't do something to beef-up the rubber seal to make it more effective, it may be time to upgrade to the RF1100. You may also want to consider…
- Leaking RF1000 [image: View Post]vfrcapn, on 25 February 2010 - 08:03 PM, said: I guess you've loosened and adjusted the plates on the side? Yep. A ridiculous number of times.
- Leaking RF1000 I have three different visors! The one that came with it, a Pinlock (that I use most of the time), and a dark smoke visor. All three leak. Now, they don't leak if I am moving along nicely, with the airflow blowing the…
- Leaking RF1000 So, I live in the Pacific Northwest. I also insist on riding to work daily in all sorts of weather conditions. About the only time I don't ride is when it dips down into the freezing temps, and it is wet. I am at the…
- Power Commander ineffective So, I went ahead and did the re-wire that Coderighter recommends, and let me tell you, it works! I tried creeping up on the -11.4% that I needed to correct the speedo, to see if I could get close without the re-wire.…
- Power Commander ineffective [image: View Post]BaileyRock, on 05 February 2010 - 08:45 PM, said: Glad you got this figured out! :fing02: You must have 98/99 headers though as 2000 headers had the CAT and was the first year of CAT & smaller tube…
- Power Commander ineffective [image: View Post]PLCGuy, on 05 February 2010 - 05:56 PM, said: "I put a SH on at the exact same time that I put in the PC3! It is set at -11.4" Whats an SH? I'm very interested to see what catless will do for you…
- Power Commander ineffective Coderighter, you da man! I went out and zero'd my SH, and just got back from an hour of smooth, speedy bliss! Thanks so much! I owe you a beer or two! Thanks for posting the picks of how to hook it up, too! I do like…
- Power Commander ineffective I think that Coderighter is on to something. I put a SH on at the exact same time that I put in the PC3! It is set at -11.4. Som B*&ch! I am just not clear on how to go about fixing it. If you could dumb it down for me,…
- Power Commander ineffective PM sent.
- Power Commander ineffective Yep, I know how to modify a map. I have been doing so daily, it seems. Yes, I am using o2 eliminators. Right now, I am using Cozye's map for the 0-2-5-10% throttle range, all the way through from 0-12500 rpm. For the 20…
- Power Commander ineffective Hello everyone. I have a 2007 RWB, that I recently installed a PC3 on. I did not know that the option of the PC5 was even available, (for an 09), at the time that I made the purchase. I have done some mods: 00 catless…
- Benefits of Power Commander on stock 6th gen? The reason that the bike runs better, is because it is getting more fuel. The thing is starved from the factory! When I did my header swap, all four valve stems were white, from lean conditions. If you don't want to…
- Benefits of Power Commander on stock 6th gen? I have one on my 07 RWB, and I can't say enough about it! I have cat-less 5th gen OEM headers, modded airbox, -1 countershaft, and Staintunes. The transition is gone, and the thing is just plain smooth when running…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.