VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 26564

entropy

6 posts recovered 2 threads started First seen 2 Feb 2013 Last seen 20 May 2013

Threads started

2 in the archive
  1. Bike Idles Above 3000 Rpm In The Cold entropy 9 20 May 2013 27 Aug 2015 entropy · 20 May 2013 – 27 Aug 2015
  2. How Not To Change Oil Cooler Lines (And A Shout-Out To Vee-Eff-Ar) entropy 9 2 Feb 2013 3 Feb 2013 entropy · 2 Feb 2013 – 3 Feb 2013

Recent posts

All 6
  1. Bike Idles Above 3000 Rpm In The Cold 20 May 2013 23:26 so, we've just started getting temperatures below 10C at night, and my bike doesn't seem to like it. the idle sits about 2000 rpm when cold and will stay there IF i don't hit the throttle. if i pull some throttle, the…
  2. Phlebmaster's 1987 Vfr750F Evolution- Full Of Pics And Win! 24 Feb 2013 04:22 score!
  3. Accent Lighting 16 Feb 2013 23:13 to each his own... I have not done this to my bike because i think they look uber poser.
  4. How Not To Change Oil Cooler Lines (And A Shout-Out To Vee-Eff-Ar) 3 Feb 2013 08:18 Left side.. Wetness around the bolts at the oil cooler but out may just be the oil on the seal working it's way out. No puddles and the ride today went well...twisted the wrist to get the rpm up to about ten…
  5. How Not To Change Oil Cooler Lines (And A Shout-Out To Vee-Eff-Ar) 2 Feb 2013 21:07 A torque wrench on an M6 bolt has to be very sensitive--there's usually not much torque to "test". I have two torque wrenches, one 1/2" drive for big fasteners and the other 3/8" drive for smaller ones. Another catch is…
  6. How Not To Change Oil Cooler Lines (And A Shout-Out To Vee-Eff-Ar) 2 Feb 2013 12:27 So, did the oil change, oil cooler line change, rear brake pads and chain adjust with Vee-Eff-Ar (big shout-out to Vee-Eff-Ar for letting me use his tools and garage, but not for letting me use his torque wrench) 1.…

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.