Member record · ID 33318
VfrViddy
32 posts recovered 0 threads started First seen 23 Jun 2015 Last seen 23 Apr 2017
Recent posts
All 32- AWE VFR800 sport cruiser custom Wow.... Just wow! Sent fra min D5503 via Tapatalk
- Supercharging my 8th Gen Following!! Sent fra min D5503 via Tapatalk
- Fitted An Automatic Chain Oiler [image: 18d0500b2369acbc758117c67504266d.jpg] Sent from my iPad using Tapatalk
- 15Mpg? Omg...fml ooh.. I ment... it is not leveled. Tilting... pfft.. Sorry! Sent from my iPad using Tapatalk
- 15Mpg? Omg...fml what camera do you use? it is going up hill... [image: emoji38.png] that might help. Or not. Sent from my iPad using Tapatalk
- From Silver To Black The paint.. Got a number on that? Need to paint my clutch cover. Is it Sp405? Sent from my iPad using Tapatalk
- Bleeding/fluid Replacement On Linked Brakes W/abs On 6Th Generation (The Ultimate Guide) Makes perfect sense. Anyway.. Another try today. Sent fra min D5503 via Tapatalk Did not do much. :-P Sent fra min D5503 via Tapatalk
- Bleeding/fluid Replacement On Linked Brakes W/abs On 6Th Generation (The Ultimate Guide) In other Words. Is it possible to pull out the piston of the second master cylinder..? Sent fra min D5503 via Tapatalk
- Bleeding/fluid Replacement On Linked Brakes W/abs On 6Th Generation (The Ultimate Guide) when removing the upper bolt of left caliper, and the lower bolt is removed, the Secondary master CYLINDER gets,pulled out and snapping just as the bolt gets loosened.. Sorry if my english is bad, but I do my best.…
- Bleeding/fluid Replacement On Linked Brakes W/abs On 6Th Generation (The Ultimate Guide) Wondering if air in the smc can create pulsating movement in the caliper when braking. When removing the left front caliper and taking out the lower bolt first, it is resulting in severe movement in the smc when…
- Brake Bleeding VTEC and 5th Generation Hey. Can air in CBS cause vibration? Thinking about the left caliper and the travel it has up and down. Got som mystery vibration that I got when I first put wilbers Springs in my forks. Thats the first thing I did. And…
- 5th Gen VTR1000 fork swap wow.. I'm done! and back home.. the clock is 00.35 here. NEVER have a ride of 8 km in heavy rain felt so good. Sent from my iPad using Tapatalk
- 5th Gen VTR1000 fork swap Ok I think it's only me then. The bushings are one year old and looking good. Been in here before. Currently installing.. Some tings to consider that i did not think about. Like getting the o-ring in there in one piece.…
- 5th Gen VTR1000 fork swap I have fitted upper and lower fork legs and got a a litle bit of play when i move them side to side. Is this normal? Only fitted with bushings, no oil seal. Sent fra min D5503 via Tapatalk
- 5th Gen VTR1000 fork swap Same torque as the compression valve? 0.35 kgfm? Sent fra min D5503 via Tapatalk I went with the C35 stack on the compression by the way.. Sent fra min D5503 via Tapatalk
- 5th Gen VTR1000 fork swap Ey Terry.. on the Rebound valve, there was one 10 x17 and one or two or three smaller shims. Do I just replace the 10x17 with 5 other 15x17? or replace the whole stack with only 15x17 shims?
- 5th Gen VTR1000 fork swap not shure what to do. i'm on two sides here. try out the allready tested, or start testing myself. The DVS did not take in consideration that I have a stiffer spring. sheith that I do not know the spring rate though.…
- 5th Gen VTR1000 fork swap Oh yea.. Oil level recomended was 140mm. Any reason you did not use gold valve on the rebound Terry? And.. Not shure if i should drill the hole or not. I'm thinking not, as that only counts for the forks without rebound…
- 5th Gen VTR1000 fork swap yo.. ok now I have the knowledge I need, I think. I did the DVS (Digital Valving Search) on Race Tech and recomended shim stack for me is c35 I'm 208 pounds. so.. what do you think Terry? should I also re-shim the…
- 5th Gen VTR1000 fork swap my "problem" now is that Wilbers only list the vfr 800 as Rc46. that is both the 5th gen and 6th gen. I did notice that the old springs was smaller in width, but never really meassured it. I also had a skveeky sound…
- 5th Gen VTR1000 fork swap Does anyone know if there is any differences in spring diameter/width on 5.gen and 6.th gen vfr?
- 5th Gen VTR1000 fork swap ok.. waiting for parts to arrive next week. still wondering about my wilbers vfr springs though. fitting with' the vtr damping rod and cap, what spacer do I use and how mutch do I cut? I can compare the length of the…
- 5th Gen VTR1000 fork swap Ended up bying from ebay. so far.. VTR Forks. http://opcoa.st/Hl8d7 . Gold Valves http://opcoa.st/Hl8JG
- 5th Gen VTR1000 fork swap placed the order today.. got an email where they wanted me to send credit card information by email. oh no.. I am not doing that. so sorry.. thinking ebay is a safer way.
- 5th Gen VTR1000 fork swap then i have ordered the valving kit. the first one on the list. FMGV S2040
- 5th Gen VTR1000 fork swap Just read the earlyer post. Love it!! great job and wonderful information! i have changed rubber sealings 2 times and know how to get the air out, and meassure the oil level. but my knowlege stops there. gold valves,…
- 5th Gen VTR1000 fork swap Thanks!! Terry. sounds just like what I need. As told before, I have a pair of wilbers springs but my lower fork legs are so worn that i beleive they need replacing as well. Anyone got the fork cap and the damper rod…
- 5th Gen VTR1000 fork swap Or.. I Dont need the VTR upper forks.. Only the cap with rebound adjuster and the rest That goes inside.
- 5th Gen VTR1000 fork swap Anyone who can compare the vtr spring with the vfr spring? A litle confusing as to how much the spacer needs to be cut. I would like my vfr as close to original as possible. But had my first track day last weekend and…
- 5th Gen VTR1000 fork swap I have Wilbers springs in my stock vfr -98 forks now, but there I have no rebound damping what so ever. The fork oil that came with it was SAE 5. I beleive the lower case is worn out. Bike run over 100.000 km There are…
- 5th Gen VTR1000 fork swap I belive the VTR 1000 forks have rebound damping adjuster?
- 5th Gen VTR1000 fork swap Why not use the lower outer leg from the VFR 800 and the upper inner tube from the VTR? Just asking..
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.