Member record · ID 37013
Trygve
8 posts recovered 1 thread started First seen 29 Nov 2016 Last seen 18 May 2018
Threads started
1 in the archiveRecent posts
All 8- Bleeding/fluid Replacement On Linked Brakes W/abs On 6Th Generation (The Ultimate Guide) Great detailed write up. Any idea why I can't see the pictures attached? Does the proportional valve unit need to be cleaned, before i have (another) go at bleeding? My calipers and master cylinders did. And back wheel…
- linked brake system bleed instructions I was thinking the same, but then I found a more detailed write up on how to bleed the brakes. Especially in regards to how to get fluid into the proportional system. So now I'm not sure if I should try that way or if I…
- linked brake system bleed instructions After cleaning all three master cylinders and pistons in calipers. New seals in calipers. And a lot of bleeding. All air seems to be out, but when I press back break and release, the back breaks still holds. Only…
- WHAT DID YOU DO TODAY TO YOUR VFR 6TH GEN ? Took my forks off and apart. Putting new seals, bushings and oil. Bush mechanic style of keeping the bike upright while front wheel is off. [image: 20180424_122840.jpg]
- FAULTY GROUND CONNECTOR Found it! Thanks. Its in good nick. Will wait and see what Honda says, re recall. Then attack it with a soldering iron. In the mean time I've got panels to fix and then paint. How thick a wire did you use from solder…
- FAULTY GROUND CONNECTOR So after looking for grounding cluster (for days) somewhere near the battery, now I know better. On my 2002 front fairing is going off tomorrow! But just to clarify. I am still waiting to hear from Honda (Australia) to…
- 6th Gen - Blue Connector Ground Fix - How To. Love to see the pictures. Not a message from photobucket. Any chance? Love the site. Trygve in Australia.
- Headlight plastics on Gen6 Can any one please tell me what kind of plastic is used to make the headlights on my 2002 VFR800, I would like to try gluing one of the 'thingamajig' that has come off. The one that holds the screw that bolts on below…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.