Member record · ID 4936
87whitevfr
10 posts recovered 2 threads started First seen 23 Jun 2010 Last seen 24 Jan 2011
Threads started
2 in the archiveRecent posts
All 10- HID headlight Hi all, Trying to tie up a few loose ends before spring and I was thinking about an HID kit for the bike. Has anyone installed one of these kits before on a VFR? There are quite a few kits available for the H4 bulb. Any…
- Suspension Here is another solution than a fox shock. I also had Jamie do a shock for my 87 but I bought a f4i shock off ebay for $30 sent it to Jamie to work his magic. This is a picture of the two side by side. [image: Attached…
- Almost done Little help needed Well I have the modified shock but the shock is not the reason the pipe doesn't fit, the pipe is actually welded crooked not allowing it to slide on all the way. Anyway I am really convinced that it is a bad design and…
- Almost done Little help needed Well I spent a couple hours on the bike today, some progress some disappointment . Anyway here is the progress, I bleed the clutch line and the rear brake line no problem, front lines I have an issue. I have a new…
- Almost done Little help needed Here are a few pictures of the harness for you. The only thing I was unsure of was the location of the fuel pump relay. If you find a better spot or the right spot let me know. Attached thumbnail(s) [image: Attached…
- Almost done Little help needed [image: View Post]fatso127, on 01 July 2010 - 09:41 AM, said: [image: View Post]87whitevfr, on 30 June 2010 - 06:20 PM, said: So let me get this straight, you are extending the pipe so the collector sits between the…
- Almost done Little help needed So let me get this straight, you are extending the pipe so the collector sits between the rear wheel and the shock linkage? I am almost sure that even if I had the stock shock mounted the pipe would still hit the same…
- Almost done Little help needed [image: View Post]fatso127, on 28 June 2010 - 06:54 PM, said: [image: View Post]fatso127, on 28 June 2010 - 06:05 PM, said: [image: View Post]87whitevfr, on 26 June 2010 - 11:40 AM, said: Well here is a picture of what…
- Almost done Little help needed Well here is a picture of what im talking about, does anybody have a picture of this area? Also any advice on whether I should run the yosh pipe without rejetting? Thanks Attached thumbnail(s) [image: Attached Image:…
- Almost done Little help needed Hello all, I am almost done putting the bike back together, I will post a picture of all the new powder coated bits but first I have a question. I put the subframe back on and have all the wires accounted for and…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.