#1 Thread starter
Has anyone tried adjusting the angle of the clip-ons? Seems like it would change the steering effort somewhat....
VFR Discussion Group -> Clip-on angle
4 posts Started 1 Apr 2005 Last recovered post 1 Apr 2005 Wayback Machine snapshot 1 May 2005
I would love to change my hand possition on the '03 but there is virtually no adjustment. I've been thinking of grinding some off those limiting tabs but.... it's grinding..... and my VFR
Have a look at these pics...(IMG:http://www.vfrdiscussion.com/forum/uploads/1112110552/gallery_909_195_15200.jpg)
Bars adjusted.. (IMG:http://www.vfrdiscussion.com/forum/uploads/1112110552/gallery_909_195_39440.jpg)
Bars forward (Small).JPG
These adjustments are possible using my risers, which allow for some fore and aft movement , while still maintaining the peg engaged in the slot.
Rod.
Bars adjusted.. (IMG:http://www.vfrdiscussion.com/forum/uploads/1112110552/gallery_909_195_39440.jpg)
Bars forward (Small).JPG
These adjustments are possible using my risers, which allow for some fore and aft movement , while still maintaining the peg engaged in the slot.
Rod.
I haven't tried changing the clip-on angle, that works for me stock.
What I want to do is rotate the levers down. Unfortunately I hit the master cylinder against the clip-on mount first. Bleh.
What I want to do is rotate the levers down. Unfortunately I hit the master cylinder against the clip-on mount first. Bleh.
End of thread · 4 posts recovered Wayback Machine snapshot 1 May 2005