Member record · ID 12811
jenshenrik
18 posts recovered 0 threads started First seen 18 Apr 2012 Last seen 26 Mar 2013
Recent posts
All 18- Brake caliper mounting bolt "Replace with new ones or not" Take a look at this page: http://www.qldcorvetteclub.com.au/tech/tech_talk/bolts.htm It's pretty informative :) Edited March 26, 2013 by jenshenrik
- Led Install W/stock Flasher, Faster Is Better? Some times, but not when installing the bulbs showed here from superbrightleds.com http://www.fjrforum....howtopic=125167 I bought a pair og CREE LED's from dx.com. They also appeared to be less diffuse and thereby less…
- Brake caliper mounting bolt "Replace with new ones or not" motormike Just got back from a ride without Loctite on my used caliper bolts and new tires. I didn't die. Damn, the VFR is fun to ride! \m/ \m/ It's been a while now... Are you still alive? :D
- 91 Vfr Fork Swap First generation Kawasaki ZX-12R front is a direct swap! You get preload,compression and rebound adjustibility and 320mm brake discs with 6 pot brake calibers for a bonus. Wow, that sounds great! Do you happen to know,…
- 91 Vfr Fork Swap Btw, the CBR600F3 (in US-spec terminology) is a CBR600FS-W (in ROW-spec terminology). I used a VFR750FR-V front wheel on my VTR fork conversion, and could have used the rotors/discs as well, but ended up using…
- 91 Vfr Fork Swap I am now looking for F3 forks as there are going to be a lot more of them and my front fender is manky anyway so i wouldn't mind changing that out. if it was a thing that i wanted to keep OEM as much as possible i…
- 91 Vfr Fork Swap This thread is very informative :) So, if one decides to do the VTR fork swap including the calipers. What about the discs
- 91 Vfr Fork Swap Just pre-load your existing forks with some spacers on top of the springs (I've used 2 pence pieces on older bikes before now - as for cost, around 8p a side!). I imagine lots of people will slate this cheap-skate idea…
- 91 Vfr Fork Swap You'd probably be better off buying a new pair of springs... OEM ones will be quite weak. Ciao, Good idea :) I bought a pair of Wilbers and some 15W oil. Quite heavy oil but very good on twisted, bumpy roads :D
- 91 Vfr Fork Swap You need to buy pos. : 13, 18 and 33 Good luck :) [image: uploadfromtaptalk1352055896480.jpg]
- Digital Gear Indicator for 6th Gen Sorry, my last post went wrong... I you wanna save some money, you can buy a gear indicator here: http://www.sunteksto...Motorcycle.html I saw a guy at VFR Club Spain mounted it into the dash of an RC36-1 :)
- Brake caliper mounting bolt "Replace with new ones or not" I also reuse the bolts, an apply some Loctite 246 (medium strength) :) It's VERY important to rember the Loctite, as the caliper bolts can be loose with the risk of a serious crash :huh:
- Carb Gurus Please Help! Perhaps this answer is a little to simple: But did you rember to adjust the idle by using the plastic knob attached to the cable at the left hand side of the carbs? It's function is like the "stop position" of the carb…
- Carb Gurus Please Help! Hi, You should take a look at this guide with pics: http://www.bikersora...ead.php?t=87239 Greetings from Denmark :)
- Helmet weight Last year I decided to buy the Shoei XR 1100 but ended up buying a Nolan N85. It's aerodynamic, comfortable, safe, pretty light and very ventilated. Good luck :)
- tasty 88 vfr Cool... :)
- Finally started tearing into the 93 So, this how i've mounted the RR. No fan needed. You could consider this method ;) [image: uploadfromtaptalk1334771619608.jpg] [image: uploadfromtaptalk1334771661512.jpg]
- Finally started tearing into the 93 Looks like the Blackbird RR (SH701-12) It should be OK. Mine is (I hope...) :) BTW: You should tak a look at your brake fluid level ;)
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.