Member record · ID 13830
iamthedruman
13 posts recovered 3 threads started First seen 6 Aug 2009 Last seen 6 Sep 2016
Threads started
3 in the archiveRecent posts
All 13- Upgraded Rotor??? Thanks for the advice. I got the stator housing apart and measured. The inside diameter is 11.5 cm (115mm) as is the stator. I had the wiring harness recall done back in '09 so they must've done this at the same time.…
- Upgraded Rotor??? Hi all, Well, my turn has come to deal with the dreaded burnt stator connector. I had the harness recall done in August 2009. A few weeks back I noticed electrical trouble and traced it down to the stator (continuity on…
- Viffercrab's Chinese Fairings Build Thread Let's see: new bodywork, hugger, and an 8-spoke? Should look ballin' when done! Following... Anxious to take a peek at what's coming your way!
- Canadian Suppliers For Tires? FYI... Here are the latest prices from Pete's on Sport Touring tires. These are current as of mid-August 2015 and include sales tax and shipping to Ottawa. YMMV.…
- Kingston, ON to Victoria, BC-First long trip FWIW, you've got a fabulous trip ready to go! I rode to Newfoundland and back last summer in preparation for my Ottawa to Nanaimo trip. A couple equipment items I learned about: 1. Tires: Between now and then, you might…
- Completed....Custom HID Conversion Kit Definitely interested. Very cool idea and implementation. I'd be interested in a 4300k kit and love to see the beam pattern too.
- Givi Plxr Installation Yes, I did get them to line up. The trick is to START with the fender point and work your way forward. Since it moves slightly, it's easier to attach the footpeg one, finishing off with the passenger handle point.
- Loose sidestand/kickstand [image: View Post]Baileyrock, on 29 November 2009 - 04:16 PM, said: There is one bolt and one nut(stud) holding the sidestand on, but one has the tendency to fall out. Check both! :rolleyes: So if I understand you…
- Loose sidestand/kickstand So a couple weeks back I put the sidestand down and noticed the bike was leaning much farther over to the side than was usual. Pulling the kickstand apart and reassembling it hasn't helped. It's still really loose…
- The Official Oil Thread I always change my oil after a ride (wait a couple minutes so it's not scalding hot) and I use regular Rotella with whatever filter I can find for a decent price (according to the list of acceptable substitutes). I…
- Givi Plxr Installation So after sleeping on it, I tried attaching the three mounting points, starting with the rear fender. With a little 'persuasion', (read, rubber mallet...) I was able to get everything hooked up all hunky dorey. As…
- Givi Plxr Installation Well, I did it... Sorta... The packages arrived no problem and were well packed from Sport Tour LTD. I'd definitely do business with them again. The Mounting Kit included the proper hardware and was easy enough to…
- Givi Plxr Installation Well, I went and bought myself a set of the Givi V35s as well as the PLXR support rack. I'll be traveling an hour or so to pick them up and want to install them on-site before riding back home. My question is twofold:…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.