Member record · ID 21367
mountainmotor
10 posts recovered 1 thread started First seen 1 Dec 2010 Last seen 30 Apr 2011
Threads started
1 in the archiveRecent posts
All 10- Powercommander for VFR1200f Dutchgixxer, If that was a sixth gear pull then forget the following . If the dyno results wasn't a pull using 6th gear , suggest looking over your VSP mod and perhaps even your first/second gear mod wiring . Torque…
- Bazzaz needs a VFR1200 for product development [image: View Post]ZenMoto, on 09 March 2011 - 04:41 AM, said: Another update today. They are basically done with my bike. I forgot to say, many thanks for taking your bike to Bazzaz. < thumbs-up >
- Bazzaz needs a VFR1200 for product development [image: View Post]Dutchgixxer, on 09 March 2011 - 05:57 AM, said: Can you tell me how the fuel mapping is altered ? Is a PC5 used ?? or .... Bazzaz has their own software for the ZF-I Fuel Control Unit - Stock muffler…
- Bazzaz needs a VFR1200 for product development Time will tell. I hope they can make a batch of the connectors needed for both fueling products and something to get to the bottom of restricted power in first two gears. The throttle butterflies won't open in 1st or…
- Bazzaz needs a VFR1200 for product development Anyone close enough to take their VFR1200 to Bazzaz in Chino California ---- they are needing a bike for product development. Both models -- Pass it along http://www.bazzaz.net
- Aftermarket vfr1200 slipons [image: View Post]HispanicSlammer, on 06 June 2010 - 10:48 AM, said: [image: View Post]vfr1127, on 06 June 2010 - 09:32 AM, said: Of the 3, the 2 bros sounds the best. Definitely cheesier looking than the others,…
- VFR1200 PAIR removal [image: View Post]phobe, on 08 October 2010 - 05:19 PM, said: [image: View Post]Tamworth, on 08 October 2010 - 03:37 PM, said: [image: View Post]phobe, on 07 October 2010 - 04:54 PM, said: I went ahead and removed the…
- Powercommander for VFR1200f [image: View Post]MSGTR, on 01 December 2010 - 10:23 AM, said: None of the information is likely to appear on the site. Call this guy for the details: Chris Kelly Dynojet Research 2191 Mendenhall Dr. Suite 105 North Las…
- Powercommander for VFR1200f Thanks much for the reply but unfortunately my USB cable and lap top are about 1500 miles from your neighborhood <grin> The free downloadable software is on the PC site . Just need the cable to communicate with the PC-V…
- Powercommander for VFR1200f [image: View Post]MSGTR, on 26 October 2010 - 09:04 AM, said: I have 9, just lke they said; two from the Commander, seven from the Jardine. Idle has smoothed out and the flat spot seems to be gone. I won't know about…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.