Member record · ID 23324
cybershade69
26 posts recovered 3 threads started First seen 26 Sep 2011 Last seen 11 Aug 2013
Threads started
3 in the archiveRecent posts
All 26- Considering An 01 Vfr, 10K Miles, Original Owner, $4500 I bought my stock 00 with just over 3000 miles 2 years ago for $3600. The one you are looking at has a few mods, but seem a bit high.
- What Kind Of Mpg Do You Get? I get between 46-49 MPG. Mostly highways to and from work.
- I Know A Guy, Who Paints . . . +1 on pictures
- New leathers for me! Very Nice!!! I'm jealous!!!!
- Getting to a coolant leak started it yesterday afternoon...and everything worked correctly. Idle was working correct. I will try it again this morning. Is the variable intake suppose to close as soon as you start the bike?
- Getting to a coolant leak The idle screw is all the way out. I will go and look at the wax unit. Thanks
- Getting to a coolant leak Ok, I finally got the bike put back together, and now when it starts it idles about at the right speed then as it get warmer the idle increases until the it is running at almost 3000 rpm. What do I need to check?
- Getting to a coolant leak Cool thanks
- Getting to a coolant leak Ok got it clean. Here is what it looks like. [image: Posted Image] There is some pitting. Am I going to need to replace the housing? Sent from my iPad using Tapatalk HD
- Don't ride like this! (I made a squid vid) Wow that looks great....I would not drag a foot peg with your camera in pace.
- Getting to a coolant leak What is the best way to clean this off? [image: Posted Image] Sent from my iPad using Tapatalk HD
- Getting to a coolant leak Well I bought a long screw driver and removed the throtle bodies off the bike. Then removed the hoses connected to the thermostat. On the website I was looking at, the hose I need to replace have 2 part numbers.…
- Getting to a coolant leak Well the broken vacuum fitting is off the valve assembly bypass control solenoid. Some what expensive to replace. Can't do anything more tonight. My long screwdriver is a little to short and I have to head to work in a…
- Getting to a coolant leak Well I have gotten this far. Found a broken vacuum fitting looks like some one tried to glue back together. [image: Posted Image] Sent from my iPad using Tapatalk HD
- Getting to a coolant leak I started to smell coolant after turning off my bike a few days ago with no drips on the floor. Today, I pulled the plastic and looked in the V behind the reserve tank and saw that an area where one of the hoses…
- Front radiator [image: View Post]CrazyT, on 22 June 2012 - 03:09 PM, said: I think almost all of the 'overheating issues' on this forum are 100% mental. If Honda put a bar graph, or old style analog meter with 'C' and 'H', and 200…
- How old are our VFR owners? Just turned 43 this week. Got my license last year. About 20 years late :sad: . But now that I have it having a blast. :tour: I love my VFR :wub: (Just don't tell my wife, she might get jealous) :laughing6-hehe:
- Quarter of a day @ JFK...... [image: View Post]Dutchy, on 09 May 2012 - 03:50 AM, said: :pissed: Found out that Delta scrapped my connecting flight to Charlotte NC this Saturday. Landing @JFK @1PM, my flight will now not leave till 7PM..... 6 hours…
- Fuel Smell I pulled off the plastic and did notice the end if the vent hose was wet. I guess that explains it. Thanks When I had the plantic off I did run the bike and let it warm up. It was only a few minutes after did the fuel…
- Fuel Smell Bike is running fine and no fuel on the ground.
- Fuel Smell A few minutes after I turn off the bike, I am getting a fuel smell. It is not there when it is running or just after I turn off the bike, but shows up 3 or 4 minutes later. Any ideas?
- Then and Now Images These are great......I grew up in Colorado. Make me wish I could move back.
- Do I need to be concerned? [image: View Post]Gbam, on 10 October 2011 - 05:16 PM, said: [image: View Post]cybershade69, on 09 October 2011 - 01:25 AM, said: Ok....I returned the clip-ons to the stock position. I actually like it better in the…
- Do I need to be concerned? Ok....I returned the clip-ons to the stock position. I actually like it better in the lower position. I find I am less likely to support myself on my arms this way (go figure). I did not notice any difference in…
- Do I need to be concerned? Thanks....I won't worry about it. I see I can't spell again....concerned....wow.... :huh:
- Do I need to be concerned? It seems the previous owner took off the retaining rings and raised the handlebars on the end of the forks. Should I fix this and move them back? [image: IMGP0155.JPG] [image: IMGP0158.JPG]
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.