Member record · ID 28917
steveb77
11 posts recovered 0 threads started First seen 26 Apr 2014 Last seen 9 May 2016
Recent posts
All 11- My German VFR The gearbox on the K1200's were very cluncky and prone to clutch problems. The gearbox was greatly improved for the K1300 as was the clutch. Both of which will tranfer across. Having riden both the K12, K13 and the VFR…
- Big H Issued A Recall On Vfr1200F And Vfr1200X Re:drive-Shafts I was told yesterday that when the test is carried out and passes a pinch mark is out on the drive shaft UJ. When the shaft is replaced they put a punch mark on the right hand subframe rail under the seat.
- Key Tag For 8Th Generation Vfr As long as you don't loose both keys, you can order a blank key and programme it to the HISS. If you loose both keys you will need to replace the ecu.
- Clutch Pull A company in the uk make a replacement clutch slave cylinder that give a lighter clutch action with a 38mm piston. They are called Oberon performance. http://www.oberon-pe...e_Cylinder.html
- Big H Issued A Recall On Vfr1200F And Vfr1200X Re:drive-Shafts Went into my local uk Honda dealer. Said they were only at phase 1 of the recall. Remove, inspect and replace if faulty with the same spec driveshaft. The modified driveshaft is still not available. Phase 2 will happen…
- Big H Issued A Recall On Vfr1200F And Vfr1200X Re:drive-Shafts Honda uk are now showing the driveshaft recall when you go onto the Honda updates and recall page. My 2014 came up when I entered the VIN.
- Big H Issued A Recall On Vfr1200F And Vfr1200X Re:drive-Shafts I get the same when I check my bike details. The recall still hasn't been made official in the uk. Hopefully they are just waiting for the parts to be available before they anounce it. But it is definitely going to be…
- 1998 Winter Overhaul It is normal. One should be flat and the other one is conical. They are there to help the clutch plates to release so that you don't get clutch drag
- She's In My Garage! Your going to love the VFR. I'm in the uk and have got a 2013 in the same colour. For the uk I would fit a rad gaurd and a front fender extender. I have the r&g rad gaurd fitted which made no difference to the running…
- Cam Chain Tensioner, Without Throttle Body Removal I replaced the rear CCT this morning, no issues. Started the bike, the previous noise was gone, a problem solved ... so I thought! However, as I had bought the pair of CCTs I went on to do the rear for a full belt and…
- After Replacing Battery Starter Runs But Engine's Not Starting If the starter motor is spinning but the engine is not turning over, it could be the starter clutch is not engaging.
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.