VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

GPS Mounting problem

8 posts Started 26 May 2012 Last recovered post 27 May 2012 Wayback Machine snapshot 14 Apr 2013

#1
I just got my RAM mount in the mail and have come across an issue with installation.

I ordered the steering stem powerlet accessory plug which I have not mounted yet, and it looks like with my tank bag on, and the GPS in a place where I can see it, there wont be enough room to stick a plug in because the RAM mount blocks it.

I dont want to mount the GPS to the left handlebar because I am going to mount a camera there. Is there any way to be able to make room? or will I have to buy a different powerlet plug to place elsewhere.


[image: Posted Image]
#2
You just need to have the clamp bkt more upright, there are different lengths available.
#3
or tilt the gps mount a bit right and tilt the bracket that holds the unit a bit left....
#4
From this view, there 's still enough room for you to adjust the mount kit:

[image: Posted Image]

And if can not do as above suggestions, you can add a shim-plate between the bike frame and the mount kit, so that the mount kit could be raised a bit (up on your shim plate thickness)
#5

You just need to have the clamp bkt more upright, there are different lengths available.


I have the longest arm available and due to my large tank bag if I move the arm forward more it becomes difficult to see. I actually just noticed so the powerlet site that they have right angle plugs, which may fix my problem.
#6
This is my set up if that helps.

[image: DSC00062.JPG]
DSC00062.JPG


[image: DSC00066.JPG]
DSC00066.JPG


[image: DSC00065.JPG]
DSC00065.JPG


[image: DSC00064.JPG]
DSC00064.JPG


[image: DSC00060.JPG]
DSC00060.JPG


[image: DSC00059.JPG]
DSC00059.JPG


#7
Get some extra balls...................errrrrrrrrrrrrr a barbell extension.

[image: Posted Image]

Here I used a short arm on the bottom but you could easily use a medium RAM arm instead for even more clearance.
End of thread · 8 posts recovered Wayback Machine snapshot 14 Apr 2013