Member record · ID 14337
blkcruzer
12 posts recovered 1 thread started First seen 6 Jul 2009 Last seen 19 Apr 2011
Threads started
1 in the archiveRecent posts
All 12- Urethra, I found it!!! So when I find this connection on mine, I should probably take all 14 grounds, and add a 15th wire. Solder all 15 together and take lucky wire #15 and ground it to a freshly scuffed area on the chassis? It seems like it…
- Urethra, I found it!!! The Phantom Mate, well done. It doesn't take rocket appliances to see that your connector has had the richard! [/Ricky trailer park boys] :goofy: Another trailer park boys fan, I LOVE IT!!!! "We'll get two birds stoned…
- Question about 5th Gen Forks [image: View Post]jmundy, on 31 March 2011 - 07:22 PM, said: I noticed on the parts diagram for the front forks it looks like there is a bolt that screws into the bottom of each fork tube. I'm not talking about the…
- Now where, oh where should I put this? [image: View Post]MBrane, on 26 March 2011 - 09:13 PM, said: [image: View Post]SEBSPEED, on 26 March 2011 - 08:41 PM, said: [image: View Post]MBrane, on 26 March 2011 - 04:08 PM, said: Not enough room in your tail is…
- 2010-11 Winter Mods/Maintenance Thread On my 98 I plan to: Have forks and new 929 shock rebuilt by Jaime Daugherty Replace Head Bearings Replace wheel bearings Replace Spark Plugs Remove Pair System Sync Starter Valves Clean up around sprockets Install…
- How to remove power limitations 1st and 2nd gear phobe I went to Radio Shack and bought the switch I linked to in post 19. Here is a crude illustration of how I plan to wire it. I'll mount the switch under the seat... That will ensure that the bike has to be shut off…
- De-Dumboed Looking for Billet Marker Lights [image: View Post]AB-Oz, on 04 October 2010 - 04:58 PM, said: have a look at what this guy offers: http://www.watsendesign.com/ PERFECT, this is exactly what I have been looking for, I emailed the guy about the actual…
- De-Dumboed Looking for Billet Marker Lights After a stupid amount of searching, I am settling for these, they still seem a little large, but I can't wait to get them and put them on. Better yet, I can't wait to get Honda OEM mirrors back on it, so I can see…
- De-Dumboed Looking for Billet Marker Lights [image: View Post]steve27bha, on 01 October 2010 - 01:22 PM, said: Why not just paint the back end of the indicator plastic to match the fairing? You can see the extent of the reflector inside - just follow its edge…
- De-Dumboed Looking for Billet Marker Lights I did the dedumbo last summer after a slight mishap in the gravel. For the front lights I was looking for a solution so I did the GSXR mirrors with Darth Bling mounts. After a year of the cheap mirrors that are…
- 929 Shock w/ Ohlins Spring My new upper mount 6April2010 076small.JPG 6April2010 077small.JPG 6April2010 074small.JPG [/quote] I would like to have that same upper mount VERY badly!! Is there a possibility that I can get the piece of aluminum and…
- Fairing Fasteners There is a stickied thread about this in the paint and body forum. I got mine off ebay, they are saturn style fasteners. go to ebay, Search for "21077123". They fit perfectly. $6.99 for 25 clips + 2.80 for Priority Mail…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.