Member record · ID 19226
FROSTIE
20 posts recovered 3 threads started First seen 27 Jan 2010 Last seen 22 May 2013
Threads started
3 in the archiveRecent posts
All 20- Rattle/knock in engine. Possible starter clutch problem? My 93 rattles when it is cold if you pull the clutch in it goes away it has been that way for a few years but only if it is cold and it goes away when you disengauge the clutch.
- CHAIN REPLACEMENT Thanks to everyone who replied to my question I have about 17,000 km (10,500 mi)on mine and it looks good that is why I asked.
- CHAIN REPLACEMENT I have a 1993 VFR and I am wondering how many miles it usually is before the chain and sprockets need to be replaced?
- Honda VFR 750 RC36- Extremely high fuel consumption? It could be the choke is out of adustment as it seems odd that you never need to choke it.
- ENGINE TEMPERATURE FAN CUT IN POINT V4 Rosso, on 26 June 2012 - 10:29 AM, said: The fan should kick in at around 95C (that's somewhere between halfway and three quarter on my VFR's temp gauge. You can check if the fan is still working by bypassing the fan…
- ENGINE TEMPERATURE FAN CUT IN POINT FROSTIE, on 28 June 2012 - 08:23 AM, said: mk2davis, on 27 June 2012 - 01:57 AM, said: So . . . does your fan work? I have not had a chance to check it out I will probably get to it this weekend I shorted the fan to…
- ENGINE TEMPERATURE FAN CUT IN POINT mk2davis, on 27 June 2012 - 01:57 AM, said: So . . . does your fan work? I have not had a chance to check it out I will probably get to it this weekend
- ENGINE TEMPERATURE FAN CUT IN POINT JayJay, on 26 June 2012 - 08:37 AM, said: My 3rd Gen kicks on about slightly above half Thanks for your help
- ENGINE TEMPERATURE FAN CUT IN POINT miweber929, on 26 June 2012 - 07:57 AM, said: About halfway it should kick on. In my experience with digital readout Honda's its been on at 216F or thereabouts and will turn itself off at 212F. If yours went that high…
- ENGINE TEMPERATURE FAN CUT IN POINT V4 Rosso, on 26 June 2012 - 10:29 AM, said: The fan should kick in at around 95C (that's somewhere between halfway and three quarter on my VFR's temp gauge. You can check if the fan is still working by bypassing the fan…
- ENGINE TEMPERATURE FAN CUT IN POINT I got into a traffic jam with my 93 VFR and my temperature gauge was agout 3/4 of the way up in the temerature range ( it never got into the red) yet the fan never came on I was wondering at what point the fan should…
- How old are our VFR owners? I am 29 metric I got my licence 45 years ago when I was 20 but have really only ridden alot for the last 15 years. I have had my 93 VFR for 5 years.
- HELP!!!! Timesert thread repair kit [image: View Post]rdguy, on 21 March 2012 - 09:34 PM, said: [image: View Post]Metallican525, on 21 March 2012 - 09:01 PM, said: [image: View Post]timmythecop, on 21 March 2012 - 04:12 AM, said: arent you worried about…
- Car oil in motorcycles, good or bad? [quote name='landlover' timestamp='1303272942' post='773728'] Has anyone on here used car oil in there motorcycle or VFR? Did anything feel different or did the clutch go bad sooner than expected, was the oil tested…
- Car oil in motorcycles, good or bad? [image: View Post]FROSTIE, on 20 April 2011 - 07:06 AM, said: [image: View Post]landlover, on 19 April 2011 - 11:15 PM, said: Has anyone on here used car oil in there motorcycle or VFR? Did anything feel different or…
- Car oil in motorcycles, good or bad? [image: View Post]landlover, on 19 April 2011 - 11:15 PM, said: Has anyone on here used car oil in there motorcycle or VFR? Did anything feel different or did the clutch go bad sooner than expected, was the oil tested…
- VALVE ADJUSTMENTS Ihave a 1993 with 35,000 KM (21,000 miles) and I am wondering when I should check the valve clearances. Please let me knw how far you have gone efore the valves needed to be adjusted.
- CST Adreno C6577 [image: View Post]keny, on 19 November 2010 - 02:22 PM, said: Anyone have experiense whit these cheap Chinese rubber? :huh: [image: Posted Image] Currius to just know :biggrin: If they are anythig like to heavey truck…
- Helibars smack fairing, won't raise as much I've had my 02 VFR for about a year now. Love it. Mostly. I bought it at a dealership, and the previous owner added pretty much every desirable aftermarket part. Staintune exhaust, Zero Grav screen, helibars, PC,…
- Custom Devil Dual Underseat Exhaust System Very nice wokmanship it looks great!
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.