Member record · ID 2485
vfrdriscoll
28 posts recovered 2 threads started First seen 14 Mar 2010 Last seen 27 Dec 2012
Threads started
2 in the archiveRecent posts
All 28- Re-Setting Clock http://www.vfrdiscus...n-1999-vfr-800/
- VTEC Wheelie Unintentional. Front -1, rear +2 - crossing a road with high spot in the center and the front came up. Never really tried to wheelie. No cojones - let off the throttle and made sure it was in my NVRAM :smile:
- Considering PCV - thoughts? Thanks all for the replies. I've been back and forth with the snorkel. I will be de-snorkling it. Sounds like a good option is the PCV with autotune, and then take advantage of the dyno access to really get a good map.…
- Considering PCV - thoughts? I have a 2003 800 non ABS. Current setup: unplugged o2 sensors wiring replaced K&N filter PAIR blockoffs Two brothers exhaust 15 / 43 sprockets (had 15 / 45 and recently changed back) 11500 somewhat inflated miles from…
- A&A PAIR block off plates special run Same here. Broke 2. Used channel locks (and a few expletives to assist with the process)!
- Newbie VFR owner Welcome from Central NY.
- A&A PAIR block off plates special run [image: View Post]Veefer800Canuck, on 27 January 2012 - 01:29 AM, said: [image: View Post]vfrdriscoll, on 07 January 2012 - 03:21 PM, said: Local auto stores didn't carry vacuum caps large enough. Opted for a rubber cap…
- 03 VFR Sticker(s) Recommendation Yessir! Need to get the right size, but will order very soon.
- 03 VFR Sticker(s) Recommendation I do, and they went on very well. I used the dry method and folded over half of the sticker. I like where they ended up. Excuse the tank and seat as I'm waiting for the PAIR blockoff plates :-) Attached Images [image:…
- A&A PAIR block off plates special run Local auto stores didn't carry vacuum caps large enough. Opted for a rubber cap (also found at the auto store). 1/2" fit very nicely. Attached Images [image: DSC_0001.JPG]
- A&A PAIR block off plates special run Thanks! I'll go check out Napa today.
- A&A PAIR block off plates special run With the warmer weather up here in central NY, I prepped the bike for the parts. I did remove the air box for easy access to the front assembly, although I suppose it would be just as easy to access from the front of…
- Top 15 Motorcycle roads USA/Canada [image: Posted Image]vfrdriscoll, on 31 December 2011 - 12:44 PM, said: A few twisty runs from NY / PA to throw out there: 858 to 706 to 187 Pennsylvania Love this run! One of my favorites as well - especially the…
- A&A PAIR block off plates special run I also just ordered a set from Dan. Thanks for getting this going! Quick question - would you all recommend removing all the (soon to be unused) components (ie solenoid, hoses etc)? Or do you leave them there?
- 03 VFR Sticker(s) Recommendation First round of stickers arrived from honda-decals.com. Positioned the lower "Honda" stickers on the panels (and about to stick them). With the size stickers I ordered (13.5 x 1.75), the hole in "D" is exactly over a…
- Top 15 Motorcycle roads USA/Canada A few twisty runs from NY / PA to throw out there: 28N Adirondacks NY 30 around Pepacton Resevoir NY 858 to 706 to 187 Pennsylvania 97 near Port Jervis and up the NY/PA border 447 to 191 Pocono PA Route 327 Ithaca NY…
- where to buy -1 front sprocket Pros and cons. Biggest CON is the MPG and higher RPM to maintain a decent speed. I mainly commute now, and will be switching back to the 43, but keeping the 15. When I first made the change, I only changed the front to…
- where to buy -1 front sprocket On the 03, stock is 16 / 43. I am running 15 / 45 and use the stock chain.
- Two Brothers Stash Exhaust I have had this system on my 2003 VFR for about 10,000 miles. I really like the system. Sounds great, and it still sounds good after 10,000 miles. I use the stash side for S100, a cloth, a disc lock and a clothes lock.…
- Started cleaning my bike.. Wow! Very well done - Kudos! Now, if I could only get my family to ride :smile:
- 03 VFR Sticker(s) Recommendation Oh, wow, there are stickers (and a bike) in the picture. :ohmy:
- 03 VFR Sticker(s) Recommendation Option 1 Attached Images [image: version 2.JPG]
- 03 VFR Sticker(s) Recommendation Polarbear - sticker site commonly referenced and I've been searching is: http://honda-decals.com/ (AKA http://www.xtreemedecals.com/ ). They seems to have a bit of everything for most bikes. I have no experience…
- 03 VFR Sticker(s) Recommendation Unbalanced - nice pics. You found a few we talked about. :woohoo: I like the HONDA idea - but using the sprayer is a more interesting idea. :idea3: I'll photoshop a litte today and work the last picture. The black with…
- 03 VFR Sticker(s) Recommendation Thanks. After posting, I did find a few threads. I'll be sure to post pics when done!
- 03 VFR Sticker(s) Recommendation Apologize if this has been discussed before... 2003 Silver 800 I currently have my side panels off and have always wanted to put some sort of sticker(s) on those big silver spaces. I like the slightly older "VFR"…
- Staintune... but open to suggestions I have the Two Brothers "Stash" system. 10K miles and still sounds great. Yes, there is only one side active, but believe it or not, the other side I use for a disc lock, S100 / towel, and it is 'perfect' :smile: As…
- Introducing... [image: View Post]SEBSPEED, on 14 March 2010 - 08:38 AM, said: I would try to raise that tail up a bit if were you, looks a bit off sitting below the level of the tank. Steve, excellent job getting it to this point!…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.