Member record · ID 26909
DannyMoto
31 posts recovered 4 threads started First seen 11 Mar 2013 Last seen 6 Nov 2014
Threads started
4 in the archiveRecent posts
All 31- 6Th Gen: Led Headlight Conversion Here's a vid of the install and night testing. http://youtu.be/h5C8nmeByJA
- 6Th Gen: Led Headlight Conversion I will be getting a water-proof one soon. A night-time vid is coming, no worries! Lint, If you look back a few pages, you can see the wiring changes I've made. Stock: Low-beam fires 1 filament on the bottom bulb (an H4…
- 6Th Gen: Led Headlight Conversion http://vid26.photobu...tsTestFinal.mp4 All done!
- 6Th Gen: Led Headlight Conversion Ok, so relay is in with the addition of the RED wire going to the switch. [image: 20140923_1820101.jpg] Tiny micro switch located near the handlebar for the LED driving lights. [image: 20140923_182027.jpg] Re-pinned the…
- 6Th Gen: Led Headlight Conversion Finally had some time to work on this over the weekend. So far, I've been able to disassemble the front end and figure out mounting for both sets of LED's depending on which bulb I end up sticking with. The 2200lm…
- Aftermarket fairing kits That's the thing with these copies... They'd be great for race plastics.... but for something you don't plan on hucking down the road on it's side, I'd pay for OEM, or at least troll e-bay for some lightly used stuff.
- 6Th Gen: Led Headlight Conversion I just noticed an issue with the schematic I made. The circuit on the low-beam would shut off completely when switched to high-beam. Meaning, once you hit the HI's, you're only using the H4 HI beam.... Stock, the bike…
- 6Th Gen: Led Headlight Conversion They all have cooling fans. The ones pictured are the ones in your link from Lifetime for 149. The silver series have a removable fan (but you still have to use it) which is slightly bigger. Those are the 260 pair.
- 6Th Gen: Led Headlight Conversion Those are the IDENTICAL ones I bought!!! WOO HOO!!! I'm psyched to start tearing into mine now... Great job!! Many companies sell the same exact units with different packaging. GTR, Lifetime LED, etc... You can pick…
- 6Th Gen: Led Headlight Conversion Got the SPDT relay today. Had accidentally bought a DPST the other day and figured that out the hard way. If anyone is looking to do this you need Single Pole, Double Throw... this means the two "to accessory" poles are…
- 6Th Gen: Led Headlight Conversion They're not in yet. I've been toying around with them in my car which also takes H4's... just so I can see how to seal them. The fan shroud on the back cannot be blocked by the boot. The silver series lights are a…
- 6Th Gen: Led Headlight Conversion Lifetime LED is where I got mine from too.
- 6Th Gen: Led Headlight Conversion Those probably utilize the same LED diode that the high-beams in the H4 use and just use a different wattage. They're pretty impressive! Doing a lot of searches for LED headlight conversions and it seems to be much…
- 6Th Gen: Led Headlight Conversion WATTAGE / LUMENS: LED H4: 40/30w 3600/3200LM HI/LO 6500K x2 = 80/60w 7200/6400LM HI/LO LED H7: 6w 260LM Single Yellow 2000K x2 = 12w 520LM Driving H4: 60/55w 1650/1000LM LO only 4000K x2 = 120/110w 3300/2000LM H7: 55w…
- 6Th Gen: Led Headlight Conversion This is what I'm thinking: [image: post-26909-0-20729900-1410456527.jpg]
- 6Th Gen: Led Headlight Conversion I've decided to upgrade to LED headlight bulbs on the 06' VFR. I have H4 LEDs rated 3000lm low, 3600lm high. Both of which are cooled by fan and heat sync. Now, on the Honda we all know that the H4 only uses the…
- Eighth Gen Modathon (Round One) [image: post-8630-0-41307300-1405085749.jpg] Why are they hiding so much of that gorgeous sub-frame with the plastic side pannels..... Man-o-Man... powder coat that to match the wheels and it'd be sweet!
- 6Th Gen: Gold Valve Install Question To put everyone's questions asside... I had contacted RaceTech regarding an issue with their "one time use" code for using their Digital Valve Setting system... Mainly the fact that it was not clearly marked on their…
- 6Th Gen: Gold Valve Install Question I just emailed him... How could it be detrimental? Too much flow by-passing the valve shims?
- 6Th Gen: Gold Valve Install Question So, I noticed in the directions and on the DVS chart received from the Race Tech website... that it wants me to drill a bleed hole into the valve body. However, the hex nut base and hollow mounting shaft already act as…
- Ok Its An 8Th Gen, But What Is Its Name? I think it should be called the Panigale 800. Because this.... [image: panigale.png] Looks a lot like this.... [image: viffer.png]
- 2014 Vfr800F Test Ride I want a white one!!! Either that... or get the radiator for the new one and make a custom fairing for mine... hmmm. Probably a lot cheaper.
- I Love My Delkevic. :) Fortunately, I'm not limited to sitting still. Here's what it sounds like with the downpipes as well. (Hope you don't mind me posting this, OP. If you do I can remove it.) Baffles out…
- I Love My Delkevic. :) Made a little vid... sounds epic. I wish the salt were off the roads up here in New England so I can actually ride the stupid thing! http://www.youtube.c...f8b5bGTFpkNHAZg
- How To Wheelie Vfr 800 Dmitry DannyMoto Let me give you some tips... 1. Don't ever power-wheelie. The lack of control you have is the danger here. You may get it up, but it's a slow climb and it can be wobbly. 2. Clutch-up every time. Really?…
- How To Wheelie Vfr 800 Let me give you some tips... 1. Don't ever power-wheelie. The lack of control you have is the danger here. You may get it up, but it's a slow climb and it can be wobbly. 2. Clutch-up every time. 2a. Clutch up 1st…
- Fender Eliminator Why don't you just take the plastic fender off, and mount the light to the metal frame? Done, and done. and FREE! :)
- Hid Projector Headlights Ok guys, finished, although I had initially wanted to do quad projectors, I didn't want to deal with the hassle of finding a place to put 4 ballasts and associated wiring. The headlights are wired through a hidden,…
- Rear Wheel Conversion (Car Wheel) I'm running 190 on a 7 inch rim - I dont se any " flattened" shape I'm not an expert driver but have been to trackdays a couple of times - and yes it's easier to use the thread all to the edge - but when running in the…
- Pilot Road 3's On 6Th Gen. Just got them installed yesterday, and was able to put about 60 miles on them in the nice 48 degree weather haha. The bike had ContiMotions on it, which the rear had a plug and the front wasn't balanced... I was getting…
- Custom Devil Dual Underseat Exhaust System This looks amazing! Great job! Really cleans up the tail and shows off that SSSA!!! Edited March 11, 2013 by DannyMoto
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.