Member record · ID 27112
KOCONUT
22 posts recovered 2 threads started First seen 1 Aug 2014 Last seen 25 Jul 2016
Threads started
2 in the archiveRecent posts
All 22- High mid pipe Of course I could just cut off the tab. That's what I ended up doing. But I would have rather had the correct part. Anyways I got it installed. Looks good but a little too loud. Will prob just go back to the yoshimura…
- Two Bros. Left side exhaust vfracer750, 7/22/2016 at 10:43 PM I have a full Two Bros left exit on my 92 and I up up the 405 from you in the South Bay. Not sure how I can help out but you are more than welcome to look at the headers. Might be tough…
- Two Bros. Left side exhaust I may see if some exhaust fab shop could make me some rear tubes. I have my original pipes as well, may see if those could be modified. I was able to get the system off ebay. I usually just prowl around and if I see…
- Two Bros. Left side exhaust [image: TBR-VFR750-Header-2.jpg] Heres the best pic I could find. I need just the rear pipes.
- Two Bros. Left side exhaust So I just got off the phone with Two Bros. Awhile ago I had bought a partial left exit system online and wanted to see if they could help me out with the pipes I was missing. The tech told me that "back in the day" they…
- High mid pipe Just got the word back from Janielle. They cannot seperate link pipes and brackets into seperate pieces. So I would have to buy both sets to get what I need with my 3rd gen with a 4th gen exhaust. I will just try to…
- High mid pipe Ah I see what happened now. I have a 4th gen exhaust installed on my 3rd gen. The mounting holes in the subframe on the 3rd gen are different than the 4th gen. I ordered the 4th gen mounting kit, the pipe works but the…
- High mid pipe Anyway you could post the fitment guide? I have the same pipe and am trying toake it work with my 3rd gen. I think the mounting hole locations may be different...
- Where Are The SoCal Rides? As soon as I get my fairings done, I'd love to join you guys on a socal ride or meetup.
- 3Rd Gen Vfr750F Ninja Zx14R Rear Shock Swap I haven't ridden very much with the new shock yet. I've got all the fairings off for repaint right now. Kept the original spring in there. If I find it still is a little too soft for me I'll probably pull the shock and…
- 3Rd Gen Vfr750F Ninja Zx14R Rear Shock Swap I have used the older style link and there is just enough room at ride height for the shock to work without any clearance issues. I am a bit larger than most (around 235 lbs.) and when I'm on the bike the shock…
- My Airtech Adventure Awesome!! Nice work fitting the rear fender, looks perfect. I was looking at the airtech one-piece mid fairing too, can't wait to see how it turns out for you. Wish I saw that Black Friday deal. . . Yeah it was a pretty…
- My Airtech Adventure small update today. I have just ordered the one piece mid fairing from airtech. got 20 percent off for black friday, which pretty much just covered shipping and tax. Velcro has been holding int he rear lights very well,…
- Two Brothers Header Replication! Im in for a 3rd gen header.
- My Airtech Adventure Got around to getting the lights installed into the Airtech rear fairing. I had to decide if I was going to drill into the fairings to mount the lights like the factory did or go another cleaner route. I decided to go…
- 3Rd Gen Vfr750F Ninja Zx14R Rear Shock Swap Be careful tightening the mirror bolts on those Chinese windscreens, they are realllllly brittle Sent from my XT1254 using Tapatalk
- 3Rd Gen Vfr750F Ninja Zx14R Rear Shock Swap I would very much like one Sent from my XT1254 using Tapatalk
- 3Rd Gen Vfr750F Ninja Zx14R Rear Shock Swap So what do you mean by 'finesse' when it comes to installation? Was it a pain to install?
- My Airtech Adventure So I havent really posted on here is some time. Other bikes grabbed my attention (have a supermoto project going) so the 3rd gen took a back seat for awhile. It had all the original fairings, but someone at some point…
- My Vfr 750 Streetfighter Project :) Your streetfighter looks amazing! Great job! Eventually, I will be getting onto doing this with my 93.
- My 4Th Gen Project How did the fork upgrade go? Was it as much a bolt on as you were thinking?
- My Vfr750 Fl Project With Rc51 Sp2 Front End. Decided to check the 3rd gen boards since I havent been on in awhile and am glad to have found this thread. Your addressing every shortcoming I have been hoping to fix on my 93 VFR.
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.