Member record · ID 2973
johne
13 posts recovered 0 threads started First seen 9 Mar 2006 Last seen 27 Apr 2009
Recent posts
All 13- Fork Seal Tool Not sure if it helps with the VFR but I used a + fitting for installing seals, gives you a little more hammer area to tap it down. :blink: [image: Posted Image]
- 929/954 Shock Install (5th Gen) coils relocated on 4th gen [image: Posted Image]
- 929/954 Shock Install (5th Gen) Ok got the shock in but coils a no go for stock placement. Anyone with a 4 gen have an idea what you did? Do the coils need to be grounded via the bracket? Thanks Brian My bracket is only an inch or so long. It puts the…
- Pelican Case As Side Bags? Just got a set of Pelican 1500's for my KLR. 6lbs each, waterproof, indestructable, $80 for the pair on ebay. :biggrin: You'd probably want the larger 1550's though. I say do it, looks be damned :huh:
- 929/954 Shock Install (5th Gen) I have seen several of these with round spacers. Anyone concerned about the shock rotating, since the oem square bracket is no longer "keyed" by the frame channel? I guess it's remote, but I don't know for sure. I…
- 929/954 Shock Install (5th Gen) Well I found this thread helpful, especially the pictures, so I thought I'd add a few of my own that might help others doing this swap. I dug through my bin of "crap-I-thought-might-come-in-handy-someday" and found some…
- Mount The Hf Tire Changer I used concrete anchors.....drill holes with a masonry bit and pound em in. :fing02: [image: Posted Image]
- Why Not Aluminum? The only thing the aluminum lacks is bling. :beer:
- Harbour Freight Tire Changer I usually use irons to mount but recently I was having trouble so I used the mount bar and it worked well. :unsure: I do have one major complaint with the HF stand though....IT'S A P.O.S!!!! Mine cracked in half after…
- Wolf Exhaust, 5th Gen dude Ya where is Joe? :huh: I heard he's goin down to shoot his old lady, you know he caught her messin' 'round with another man. wink.gif
- How do you know when it's time... Since the shock degrades over time, little by little, we tend not to notice it going bad. What fixer said about type of riding, weight of rider, gear, etc. is true too. It varies. One sure way to tell would be to find…
- Buell Footpegs Modification enzed_viffer a big wrench/gorilla/LeaningOnMofoThingo. <{POST_SNAPBACK}> Any vendor links on this? smile.gif
- Buell Footpegs Modification 767fixer damn....never thought of that......thanks :idea3: but will i have enough brake light adjustment? <{POST_SNAPBACK}> I also ground about 1/8" off the threaded shaft which lowers the pedal about another 3/4". I…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.