VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

LCD Combination Meter Issue intermittent

3 posts Started 16 Jan 2017 Last recovered post 16 Jan 2017 Wayback Machine snapshot 25 Aug 2017

#1

Any insight on what to look for or test would be appreciated.

Today the LCD COMBINATION METER decided to go blank. No clock, no fuel, no temp, no trip, no odo   I stopped for gas, not long, and the combo meter came back on. I stopped a short while later and the combo meter went blank again.  It came on again before I returned home, but it went blank after arrival. 

After a search on the forum and preparing for this post, I went out to look at the gauge and the clock was up, but showing 4:34. So I'm guessing it came back about 3 hours and 34 minutes ago at the dreaded 1:00.  I turned the key and the entire gauge came up (from memory of the prior odo reading, the odo is working and showing my mileage of the ride, but trip meters were zero) When I tried to set the clock, the gauge went blank again. 

It's late here so I will take a look tomorrow. In the meantime any suggestions will help.

Dan

'01 VFR

#2

Usually it is a bad ground cluster.

Sent from my SM-N900V using Tapatalk

#3

Thanks, will start looking.

End of thread · 3 posts recovered Wayback Machine snapshot 25 Aug 2017