Clutch master cylinder question

I recently rebuilt the clutch master cylinder and refilled and bled it.

Ok the test ride I noticed that even with the lever pulled on all the way, the clutch still grabs a little bit. It's hard to get into neutral and you can feel the bike trying to move forward ever so slightly.

I figure I may still have a little bit of air in the line or the master cylinder?

Any tip for getting the rest of the air out?

Sent from my iPhone using Tapatalk

Try bleeding the banjo bolt at the MC


Sent from my iPhone using Tapatalk

I had to lean the bike over on the left in order to get all the trapped air out of the master.