Member record · ID 16351
steven113
21 posts recovered 2 threads started First seen 10 Dec 2009 Last seen 8 May 2011
Threads started
2 in the archiveRecent posts
All 21- Does anyone do long rides with stock seat? Dont sweat it.... You will be fine, although you would be more comfortable on a sargent or corbin your bike is designed for such riding. Also consider that some riders prefer the stock seat over aftermarket. Take the…
- Liknked brakes modification Not sure if it is possible but I wish that was the way honda would have designed it... It only makes sence to have linked brakes in a panic situation and most likely you would grab a hand full of front brake and forget…
- Newbie from Oldest City FL! [image: View Post]texasvfr, on 13 December 2010 - 02:22 PM, said: [image: View Post]captbill, on 13 December 2010 - 08:42 AM, said: Thankyou for letting me in your group forum. I am Capt.Bill from St Augustine FL.…
- Sprocket Trouble [image: View Post]Mac, on 19 April 2010 - 07:21 PM, said: Here we go...sprockets side by side http://www.vfrdiscus...39608_thumb.jpg This is the width of the OEM recess, You can easily see where the washer and nut were.…
- Fuel injector cleaning I found my bike as a wrecked barn find. It had been sitting for 9 years when I bought it and my first course of action was to get it to run. After a series of tests it turned out that no fuel was getting to the…
- Could you paint your own frame ? I agree that you can get good results with paint and that the frame and swingarm removal is not as difficult as some may think but I would still recomend powdercoating if you have gone as far as to remove the frame and…
- Benefits of a Power Commander on a 5th Gen here is the chart for my bike before and after the pc3 being tuned... Attached thumbnail(s) [image: Attached Image: dyno results.jpg]
- GET BENT!!! The color diff is odd? I wander if the cast sections are protected in any way?
- Any experience with bikebolts.com fasteners I used them on my previous Gsxr and had no problems whatsoever with them. The bolts are alunimum instead of stainless like the oem though.
- ducati touring 1200 http://www.youtube.c...h?v=5r5htjYQG5k
- Crazy thought Has anyone ever ported and polished the heads on a 5th or 6th gen bike? It would seem that that would be the nect most reasonable step after the basic header,slippon,PC3, and depairing that most of us have done. It is…
- what is the difference between radial and standard brakes? Im glad I wasn't the only one who did not know :idea3: Thank you for clearing this up and giving me a better understanding :fing02:
- what is the difference between radial and standard brakes? As stated in the title I would like to know what the benifit of radial brakes are and why they seem to be the preference. What differences do they have mechanicly from standard hydrolic brakes?
- Upper fairing support ben? (pics) [image: View Post]Junyr, on 04 February 2010 - 11:59 AM, said: [image: View Post]steven113, on 04 February 2010 - 11:55 AM, said: Not to say that it is impossible to straighten one out but it is very difficult to get it…
- Upper fairing support ben? (pics) Not to say that it is impossible to straighten one out but it is very difficult to get it right. IMO it is a part that is worth buying new from honda to save countless hours of frustration with more than likely less…
- Anyone tried one of these "Mini" cans? [image: View Post]gearhead82, on 20 January 2010 - 07:47 PM, said: Hi All. Came across this on ebay. It's a different (new?) Delkevic "Mini" can for $149. I've seen the other mufflers that Delkevic offer and heard a…
- 30 min fork oil change- On bike BaileyRock Auspañol On the VTEC and the 5th gen, that drain bolt isn't in such a convenient location as on the F4i forks... it's on the upside face of the inside the axle housing, so you have to pull the front wheel off…
- Suspension Options For A Gen4? If you weigh around 180lbs a member on the other forum that had a deer incedent earlier in the year is thinking about selling his setup for a 4th gen(rear aftermarket shock and matched racetec front springs). Here is…
- Not another 5G undertail exhaust. I wander if I could make something similar to that to fit under my streched fairing? I really like the clean look of his bike. Here would be the space I would have to work with. Do you think it would be possible to do…
- 19 mm tailriser? raising the fork tubes in the tree(lowering the front of the bike)makes your turn in quicker.
- Fork Braces [image: View Post]2fast2young, on 09 December 2009 - 11:28 PM, said: [image: View Post]Hammerspur, on 07 December 2009 - 06:09 AM, said: [image: View Post]Ryanme17, on 29 August 2009 - 12:36 PM, said: But don't the VTR…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.