Member record · ID 17721
pjm204
34 posts recovered 4 threads started First seen 24 Jun 2009 Last seen 3 Dec 2009
Threads started
4 in the archiveRecent posts
All 34- Exhaust Leak I dont have that exhaust but I would assume there is a gasket at the connection of the midpipe and headers. Might need to replace it, its made of some sort of lead like material, fairly soft. I'm a little surprised you…
- Power Commander Maps 2007 Australian/Euro vtec gutted cat.djm [image: View Post]dogman, on 03 December 2009 - 11:05 AM, said: File Name : 2007 Australian/Euro vtec gutted cat.djm File Submitter : dogman File Submitted : 18 Nov 2009 File Category : Power Commander Maps This map…
- PC3 map for gutted cat Keep us posted on what map you end up running and how the headers perform/sound. I just did mind today but dont have a PC yet so I am going to wait to mount them. might get them coated in the meantime. Hoping it was…
- 6th gen cat gut---how to---pic intensive What color should I jet hot coat my headers after I grind down my crappy welds?
- 6th gen cat gut---how to---pic intensive [image: View Post]Trace, on 02 December 2009 - 09:46 PM, said: Looks pretty similar to my 5th Gen Cat Gut from three years ago. I guess that "How To" is gone. Cut the heat shields off: [image: Posted Image] Mark your…
- 6th gen cat gut---how to---pic intensive I have a 2 brother stash system on the way but I also have two sets of stock mufflers, 1 of which I did a full gut to. I like the sound of the gutted stock. I may sell the 2 brothers, I will have to compare the…
- 6th gen cat gut---how to---pic intensive [image: View Post]swimmer, on 02 December 2009 - 08:24 PM, said: What was the increased performance criteria that you needed to obtain in order to justify removing pollution controls? With a BMC filter, PCIII, gutted…
- 6th gen cat gut---how to---pic intensive First let me start by thanking "Oh Whell" for providing lots of pictures during his cat gut. I intend to do the same and give a few extra pointers. Without his pictures, I would have had a lot tougher time deciding…
- elwray's 2003 VFR [image: View Post]elwray, on 03 November 2009 - 02:58 AM, said: [image: View Post]veefer800canuck, on 02 November 2009 - 10:56 PM, said: Make sure the AMSOIL 10W40 is not labelled as being "energy conserving".\ Thanks…
- Making A Strange Sound [image: View Post]Bruckner, on Oct 23 2009, 08:36 AM, said: [image: View Post]pjm204, on Oct 23 2009, 05:17 AM, said: Well I loosened the chain a tad last night, I'm not hopefull, but hoping that it takes care of my…
- Making A Strange Sound Well I loosened the chain a tad last night, I'm not hopefull, but hoping that it takes care of my shifting issues...Maybe I'm just a noob at measuring slack with the SSSA.
- Making A Strange Sound If someone in NJ, PA, NY that is knowledgeable on the CCT sound would listen to my bike I'd really appreciate it. Anyone want to meet, ride, and listen to my bike?
- 7th Gen. Vfr Group Buy! $20 x 1,000 contributors=$20,000? If that's the price for one, I say wait till 2012 when Honda blows them out for 7999 or something.
- Making A Strange Sound [image: View Post]pjm204, on Oct 22 2009, 08:46 PM, said: [image: View Post]jeremy556, on Oct 22 2009, 08:10 PM, said: [image: View Post]pjm204, on Oct 22 2009, 08:55 PM, said: I picked her up today...they couldn't hear…
- Making A Strange Sound [image: View Post]jeremy556, on Oct 22 2009, 08:10 PM, said: [image: View Post]pjm204, on Oct 22 2009, 08:55 PM, said: I picked her up today...they couldn't hear the noise(of course it goes silent when i bring it in).…
- Making A Strange Sound I picked her up today...they couldn't hear the noise(of course it goes silent when i bring it in). Its still making it but now its documented that I brought it in..... I was very tempted by the leftover CBR1000RR's for…
- Making A Strange Sound well I dropped off the bike today to see if they can get rid of the noise. I also asked them to check out the shifting. It is very clunky. Hopefully I'll get my bike back and it will be perfect. oh and hopefully they…
- Clutch Doesn't Always Disengage Fully still seems to shift like garbage....I think I am going to take it to the dealer. I also think I need a new front CCT its awfully noisy....haven't been super happy with this bike.
- Clutch Doesn't Always Disengage Fully [image: View Post]pjm204, on Oct 11 2009, 07:04 AM, said: I guess I will give that a shot before I take it to a dealer....is this a common problem? anything else I should try? I bled the line. I haven't ridden it but it…
- Clutch Doesn't Always Disengage Fully I guess I will give that a shot before I take it to a dealer....is this a common problem? anything else I should try?
- Clutch Doesn't Always Disengage Fully [image: View Post]Luvmyvfr, on Oct 10 2009, 06:13 PM, said: Hi, kinda sounds like the clutch needs to be bled....if that doesn't work is it still under warranty?? call your shitty local dealer and see what they will…
- Clutch Doesn't Always Disengage Fully I've been having shifting issues on my bike, its extremely clunky. Today while riding I kept the throttle twisted and pulled in the clutch, the RPM did not change and I continued cruising. I kept on trying this,…
- 2007 Rwb With Red Wheels? the above picture is the one I showed them, I really like it. I will likely end up going with that. Its my bike as we have all established. I am still thinking red though.
- 2007 Rwb With Red Wheels? thanks for the pics guys....if it were up to me I would be doing them gold but everyone I've talked to(girlfriend, brother, friends, parents, etc) all say it looks bad. The red in that photoshopped pic looks pretty…
- 2007 Rwb With Red Wheels? yea, the white does look great, I just want to be different.
- 2007 Rwb With Red Wheels? my intent whether red white or blue would be to get as close a match to the factory paint as possible.
- 2007 Rwb With Red Wheels? I'm due for new tires and would like to powdercoat my ugly black wheels. I've seen blue, white, and gold....but has anyone done Red? I feel like red might look good but don't really want to gamble with 120 bucks or so…
- Making A Strange Sound I listened to a post from someone with CCT noises and mine sounded very similar. If it does turn out to be the CCT, I will keep having them replace it under warranty.
- Making A Strange Sound After doing some research on here it sounds like this is a pretty common problem and that everyone states the CCT doesn't lose tension, it just makes noise. So I dont think I have to worry about the chain doing damage.…
- Making A Strange Sound Alright so I went in today to check and see what the deal was, of course they had called me while I was riding there but I didn't notice. Basically since I had removed the pair system(thought this might be the culprit)…
- Making A Strange Sound [image: View Post]jeremy556, on Jul 31 2009, 09:17 AM, said: Most likely the front cam chain tensioner. They usually last 12-15K miles (I am on my 4th), yours probably just went early. If the tech didn't know this right…
- Making A Strange Sound I bought my 2007 RWB new about a month ago and have since put about 2800 miles on it. At around mile 600 it started making a strange thwaking or tapping sound from the motor at idle, with clutch engaged or in neutral. I…
- Shinko 009 Raven Tires...a Quick Review I threw some Ravens on my Z750 right before I traded it in on the VFR(I wish I had known I was going to trade it, I would not have installed the tires)...I rode them for about 600 miles and I must say, I was impressed.…
- Low Miles, Lots Of Paint Wear id say stop riding through sandstorms.....btw I just picked up a new RWB...1200 miles in the past two weeks, no paint loss
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.