Member record · ID 37256
MsRN98
86 posts recovered 2 threads started First seen 19 Sep 2016 Last seen 4 Jan 2019
Threads started
2 in the archiveRecent posts
Last 50 of 86- Ram Air Vfr? Mohawk About 10-15% same as with most bikes, never believe a stock speedo. I've since had the bike up to a real 155mph & it was still accelerating, I had to back off because what I thought of as a smooth road before was…
- DMr fork cartridge kit Terry You will be able to re-use some of the DMr parts when you do the F4i fork swap, specifically the valve bodies and shim stacks, these can be swapped straight into the F4i forks. You will need to get some of the…
- DMr fork cartridge kit Just sent Jamie a set of forks for cartridge kit install; can’t wait to fit them to my ‘00 VFR (yellow IS the fastest color, IMO), which is currently my DD. I have a set of F4i forks that I’ll eventually swap in when I…
- my yellow VFR 9C1 Nice ride! Where did you get the rim tape? And how do you like the tank bag? I wasn't sure if a tank bag would be super handy or just in the way. I got the rim tape from ‘customTaylor33’ LLC on Amazon; it’s lasted…
- my yellow VFR I need to clean up my ‘00; still, after 21K miles in the last 21 months, I think I can fairly say that it IS the fastest color... Sent from my iPad using Tapatalk [image: f402ca316578caeabb908bede98b2be6.jpg]
- Opinion Request: 2nd bike to compliment the viffer NodakVFR Just get a "different" VFR. ;-) [image: IMG_0723.thumb.JPG.b716232c003beda602f83b90dd788672.JPG] Seconds on this idea, though a fully-loaded Honda or Yamaha touring bike also appeal. And a dirt bike for…
- 5th-Gen fork Upgrades Question--does anyone have a pair of original 6th-Gen clip-ons they'd care to part with? Sent from my iPad using Tapatalk
- 5th-Gen fork Upgrades Terry If you get 6G triples you may find that the steering lock bolt won't mate with the sockets on the headstock; for whatever reason the 5G ignition in the 6G triples sits too high and will need a few washers inserted…
- 5th-Gen fork Upgrades sfdownhill Glad to hear people are out and riding their VFRs Terry. MsRN98, go sixth gen top and bottom triples. Even good ones are inexpensive, and them you don't have to worry about matching top and bottom or doing…
- 5th-Gen fork Upgrades Terry The bearings on nearly all Hondas are interchangeable, so that won't be an issue. Not so sure about the offset of the 600 forks compared to that of the 5G/6G, maybe suck it and see? Ahhh...I hadn't even thought…
- 5th-Gen fork Upgrades Terry 600F4i fender on 600F4i forks??? That will fit just like Mr Honda intended. The fork leg spacing side to side on the 600F4i is exactly the same as the 6G. I actually have 600F4i fender fitted right now (not…
- 5th-Gen fork Upgrades MaxSwell Well most of us anyway. Correction--Men without beer goggles...can't count the number of times I've driven up on a 🦌 in broad daylight, and the silly thing stands there trying to figure out what kind of doe I…
- 5th-Gen fork Upgrades 007 Speaking from the perspective of an experienced twisty mountain rider with zero fabrication ability, I chose the following (for my 6th gen ABS): 1) Traxxion AK20 cartridges with Penske triple clicker because I…
- 5th-Gen fork Upgrades And the project begins--just bought a set of nice CBR600RR calipers, and made an offer on a set of F4i forks. Sent from my iPad using Tapatalk
- 5th-Gen fork Upgrades MaxSwell Ha! One thing they do not fend off is deer! It might castrate a sheep though. If you hit it right. There's nothing dumber than a deer in rut. Even a man in rut has something going on upstairs. Sent from my iPad…
- 5th-Gen fork Upgrades Terry What do they fend off? Ships? Evil? Sent from my iPhone using Tapatalk Ride without them, Terry, and you'll discover exactly what they fend off. ;) Sent from my iPad using Tapatalk
- 5th-Gen fork Upgrades Terry 600F4i fender on 600F4i forks??? That will fit just like Mr Honda intended. The fork leg spacing side to side on the 600F4i is exactly the same as the 6G. I actually have 600F4i fender fitted right now (not…
- 5th-Gen fork Upgrades Terry A better photo of the 5G guard on the 600F4i forks, showing the mount modification for the rear. I fitted the stock nut and bolt in the unused 5G top mount just for appearnces, but they don't do anything…
- 5th-Gen fork Upgrades Terry I started with Jamie's compression valve and springs in the stock forks, then added VTR adjusters and a rebound Gold Valve, then moved to VTR lowers and CBR600F4 brakes, now I have CBR600F4 forks in 6G triples…
- 5th-Gen fork Upgrades I feel a plan coming together, with CBR600 F4i forks, 6th-Gen clamps and bars (I assume these run essentially the same geometry as the 5th-Gen?). Not sure if I can easily run 600RR brakes; if not, F4i brakes/MC will do.…
- 5th-Gen fork Upgrades Terry I used a 600F4i rear master, and did have to cut the pushrod down to fit; a hacksaw makes short (see what I did there?) work of it. IIRC there was something in the mounts that needed modifying, maybe they were…
- 5th-Gen fork Upgrades sfdownhill Speaking of master cylinders, my notes show VTR, RC51, and F4i all having the popular-for-VFR-delink 14mm rear master cylinders. Is this accurate? Since we are talking about a fork upgrade which possibly…
- 5th-Gen fork Upgrades sfdownhill MsRN98, I have an extra set of Mello Dude's 5th gen fender-to-VTR fork adaptors if you're interested. RVFR and Terry, what was the turnaround time on your suspension projects with Jamie? [image:…
- 5th-Gen fork Upgrades RVFR My 2 cents is in a question How much do you not want to spend? I've done Jamie's up grade as well, best money spent. but right with it is the Delink, bIMO another well spent money. The process is pretty cut and…
- 5th-Gen fork Upgrades MadScientist I haven't seen any yellow 5th gens on the streets of Fitchburg lately, a red 6th a few days ago tho... I've got Jamie's internals, Superhawk lowers, and 929/954 calipers (4 piston, the superhawk only has 2…
- 5th-Gen fork Upgrades Hello All--greetings from Madison, Wisconsin! While I'm certain this topic has already been beaten to death (and I've read many of the threads), I'm going to ask about it again. With something just over 3,000 miles on…
- VFR1200F Crash Protection - recommendations Dutchy Have a look at GSG Technik from Germany Huntingunns bought these for their VFR800's http://www.gsg-mototechnik.de/ Page is in German; if you need help (or want me to call them on your behalf) just say the word..…
- Delkevic Exhaust on my 8th Gen Very nice sound! I may have to consider one of those for my 5th-Gen! Anyone know if the stainless Delkevics with the angled outlet sound similar? Sent from my iPad using Tapatalk
- Obligatory New Member post Ahhh--you're updating a VFR750. Now it makes sense. Sent from my iPad using Tapatalk
- Obligatory New Member post Does your spare headlamp not have a decent lens on it? Sent from my iPad using Tapatalk
- Obligatory New Member post bdutton That's what I went with... http://www.vfrdiscussion.com/index.php?/topic/85504-4th-Gen-Projector-Retrofit Sent from my Pixel XL using Tapatalk I also have a spare headlamp assembly, and plans to use that same H1…
- How old are VFR owners? Pushing 49 pretty hard, and amused to find myself on a bike again. Very much enjoying my '00 VFR, though--now that I've replaced the stator (22,311 miles, but age can be a factor, too), R/R and charging path, and…
- Stator Tests A voltmeter is definitely on my shortlist, and the stator-RR wires will definitely be soldered. Thanks for the suggestion about the large-gauge wire from the negative battery terminal to the soldered earth block; I can…
- Stator Tests VFROZ No, you will have to use the RR plug as I've done to my ex R1 FH012. The biggest problem is the Honda connectors, and undersized wiring from RR to main fuse and battery. You should get rid of all weak points, the…
- Cooked starter wire? This is what happens when you play with fire (CBR1K)--you get burned! Stick with your steady GF--she may not be quite as fast, but she knows how to treat you right... ;) Sent from my iPad using Tapatalk
- Stator Tests VFROZ Soldering is the best connection you can do. It is also the only type of connection I would do to the three stator to RR wires. In fact, I got rid of all connectors in the charging system. That works for me. I…
- Stator Tests VFROZ Here it is: http://www.partzilla.com/parts/detail/honda/HP-31120-MBG-003.html Ordered--thanks for the link! I should see it Tuesday or Wednesday. In the interim, I just have to figure out how to limp the bike…
- Stator Tests VFROZ Also check your earth block, this could also play havoc with your charging system and should be upgraded ASAP.. Will do; thanks for the advice. I looked at online vendors for a new Honda stator; it appears that…
- Stator Tests So I noticed that running heated clothing puts too large a load on my battery; I'v had the tach, speedometer and headlight all falter when my clothing is at maximum draw (jacket and glove liners). I ordered the wiring…
- Obligatory New Member post Welcome, sir! Looking forward to getting out myself tomorrow (high of 18°) to drive my VFR 2-1/2 hours back home. Besides freezing, I'm sure I'll have a great time! Sent from my iPad using Tapatalk
- Returning Rider: VFR 800 or 1200? Pics of the bike will be forthcoming, probably once I'm done cooking, hosting and cleaning up after our little family Thanksgiving dinner. As adventures go, picking up the bike proved.. entertaining. I got up at 1:15 am…
- Reserve A 5Th Gen Solo Rack From Kanadianken wera803 Sorry, he changed his screen name. I told him you were wanting to get a hold of him. Thanks!
- Reserve A 5Th Gen Solo Rack From Kanadianken MsRN98, 11/12/2016 at 10:56 AM Thanks for the information! I'll PM Kperham to see if that's the case (no pun intended); those are the best-looking bags I've ever seen on a 5th-Gen. It appears kperham cannot receive…
- Returning Rider: VFR 800 or 1200? Just talked with Jamie Daugherty, who's seen the bike. Sounds like I'll need new stanchion tubes within a few thousand miles, at which point there's no reason not to spring and re-valve the shock, then add shim stacks…
- Returning Rider: VFR 800 or 1200? Picking up the bike tomorrow in Fort Wayne. Weather report says high of 39°F with a 50% chance of rain or snow showers. I'm packing my Gore-Tex, a Zippo handwarmer, a Thermos full of hot coffee and my long…
- Reserve A 5Th Gen Solo Rack From Kanadianken wera803 I have the Corbin Beetle Bags on my 5th gen. They aren't made anymore, but you can find them used once in a while. Kperham may even have a set of yellow ones right now he is looking to sell. Thanks for the…
- 5th Gen Solo Racks - CLEAR OUT Ken--I may order one from you very soon. Do you know if I'd be able to mount SW-Motech pannier racks with your toprack in place?
- Reserve A 5Th Gen Solo Rack From Kanadianken wera803 Sorry, I don't have the "big box". Here are pictures with my 46L box though. [image:…
- Returning Rider: VFR 800 or 1200? Duc2V4 I think this meme puts it into perspective for some... [image: 10616661_10152320121177887_4054400244260397021_n_zpsjawb2fli.jpg] And with how much food our daughter has started putting away, we need to save our…
- Returning Rider: VFR 800 or 1200? Thanks for the suggestion, Rick. I may go fetch the bike as soon as Monday, and Jamie D. has already seen the forks and will give me his recommendations. Since time is of the essence, though, and $ currently a potential…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.