rear sets

16 posts Started 17 May 2006 Last recovered post 20 Oct 2007 Wayback Machine snapshot 7 Jul 2017

#1 tooslow Thread starter

17 May 2006 22:45

will a rear set from a 750 RC30 bolt up to a 6th gen--?

Thanks, Pat

17 May 2006 23:03

tooslowwill a rear set from a 750 RC30 bolt up to a 6th gen--?
Thanks, Pat

<{POST_SNAPBACK}>

i was recently looking for rearsets for my y2k. of the five companys listed, only one made them and only for the 6gen. i wasn't really prepared for the $468 price. i am sure tired of dragging the footpegs. if the rc 30 sets need a little help to fit give me a holler!

#3 tooslow Thread starter

17 May 2006 23:05

I found them listed under Satoracing.com really neet looking products.

Pat

#4 VFR FLYER

17 May 2006 23:11

tooslowI found them listed under Satoracing.com really neet looking products.
Pat

<{POST_SNAPBACK}>

if your worried about fitament of the sato rearsets, buy 'm and we can try them on my bike first! although i won't be riding till the bike is fixed and my ribs heal. i will help you if i can! let me know...............chuck

#5 tooslow Thread starter

17 May 2006 23:23

VFR FLYERif your worried about fitament of the sato rearsets, buy 'm and we can try them on my bike first! although i won't be riding till the bike is fixed and my ribs heal. i will help you if i can! let me know...............chuck
<{POST_SNAPBACK}>

Chuck, I think I will go by their office in Hawaiin Gardens when I get back from Reno, I will probably end up with a set----what are your opinions of their site.

Pat.

#6 VFR FLYER

17 May 2006 23:49

tooslowChuck, I think I will go by their office in Hawaiin Gardens when I get back from Reno, I will probably end up with a set----what are your opinions of their site.
Pat.

<{POST_SNAPBACK}>

sato racing products been around long enough to have good products, good customer service. they might cut you a deal if you buy two and give me one, but if i can help let me know! if you talk to someone there please ask them if the 6gen will work on my y2k. chuck..........

#7 Synaptic Misfire

18 May 2006 02:19

I posted a thread recently trying to gauge interest for an aftermarket rearset for the 6th Gen. I live near Vortex and they said if I can get enough interest they will measure my bike and add it to the product list. But the price is around $500 and not a lot of people were interested.

I do not think they will fit but it is always worth a try, you never know you might end up with a one off set that every one will lust over. Sato is good stuff.

#8 tooslow Thread starter

18 May 2006 22:59

Synaptic MisfireI posted a thread recently trying to gauge interest for an aftermarket rearset for the 6th Gen. I live near Vortex and they said if I can get enough interest they will measure my bike and add it to the product list. But the price is around $500 and not a lot of people were interested.
I do not think they will fit but it is always worth a try, you never know you might end up with a one off set that every one will lust over. Sato is good stuff.

<{POST_SNAPBACK}>

When I get back from Reno I will remove my stock sets and take them down to Sato and compare them to items on hand, maybe one will fit with minimum mods, or we might luck out and the RC30 will bolt right up.

Pat

#9 zRoYz

1 Aug 2006 11:12

Did anything come of this? I'm looking for rear sets for my 6th gen :D

Synaptic Misfire if you can get sets made I'm in 100%

Edited August 1, 2006 by zRoYz

#10 tooslow Thread starter

1 Aug 2006 12:54

zRoYzDid anything come of this? I'm looking for rear sets for my 6th gen :D
Synaptic Misfire if you can get sets made I'm in 100%

Hi guys, sorry I slacked off on my end, was getting ready to head down to Saito when telskier posts up some adjustable pegs from thurn, if you didn't see his post I think they were listed for less than 2 presidents.

If we can get an updated report on the functionality of these pieces I think this is the option I will persue.

Pat

#11 zRoYz

1 Aug 2006 13:02

tooslowHi guys, sorry I slacked off on my end, was getting ready to head down to Saito when telskier posts up some adjustable pegs from thurn, if you didn't see his post I think they were listed for less than 2 presidents.
If we can get an updated report on the functionality of these pieces I think this is the option I will persue.

Pat

That would be these http://www.thurn-motorsport.de/html/fahrwerk-rc46_2.html

Saito just look so much better but smile.gif

#12 Synaptic Misfire

1 Aug 2006 22:27

No real interest = no rear sets sorry!

#13 Guest Denny789

24 Sep 2007 04:42

If the Sato rear sets can change the shift pattern then I am interested. I have an '06 VFR

#14 Guest Denny789

24 Sep 2007 05:51

Sorry, it's late here. I am interested in any company's rear sets if they will fit the 06 VFR and can change the shift pattern. $500 is fine because I can't find anyone willing to fabricate a set.

#15 The Phantom

24 Sep 2007 06:41

Hi Denny (welcome to VFRD), are you looking to swap to race (reverse) pattern? Good luck, it's hard enough to get normal pattern rearsets for VFRs.

#16 Deathstar13

20 Oct 2007 00:54

zRoYz
tooslowHi guys, sorry I slacked off on my end, was getting ready to head down to Saito when telskier posts up some adjustable pegs from thurn, if you didn't see his post I think they were listed for less than 2 presidents.
If we can get an updated report on the functionality of these pieces I think this is the option I will persue.

Pat

That would be these http://www.thurn-motorsport.de/html/fahrwerk-rc46_2.html

Saito just look so much better but smile.gif

ok i was ready to post a thread asking how or who i could have make me the brackets to do this and what extra parts i would need.

im in awe of all the products they have i can buy to do what i need.

some of you may think im nutz but i hate the position the 6th gen puts my body into since im 6'4" when im hitting the twisties hard.

now just to figure out how to order them!

End of thread · 16 posts recovered Wayback Machine snapshot 7 Jul 2017