Member record · ID 19461
JayDog2006
14 posts recovered 2 threads started First seen 3 Feb 2010 Last seen 20 Jul 2011
Threads started
2 in the archiveRecent posts
All 14- Sonic Springs installed I just did my fork springs as well. Also with 1.0kg Sonic Springs and 7.5wt oil. I'm 6'4" and about 255lbs. I only eyeballed the sag when I set it up though. I have to get a buddy to come over and help me set it proper.…
- MRA VARIO SCREEN REVIEW Hmm... I've had mine on for over 3k miles and nothing has loosened up yet. :(
- Anyone with a MRA SpoilerScreen Windshield? I've got the MRA Vario Screen, with the adjustable wing and I love it. I'm pretty happy with the MRA quality. Unfortunately, I don't have any experience with the Spoiler Screen, but MRA makes a quality product, so I…
- Engine cuts out while riding Problem seems to have been a loose ground at the battery. Tightened it up and checked all around the bike for other loose wires. Seems like its ok now. Thanks for the help everyone!
- Engine cuts out while riding Thanks for the quick reply. I'll try replacing the battery and see if that works. It hasn't had any problems with the PCIII installed until now, and I installed that about 800 miles ago. However if the battery doesn't…
- Engine cuts out while riding Yesterday on the way to work, my 06 VFRs engine cut out while about a half mile from home. I quickly pulled the clutch and restarted it, and didn't have any problems the rest of the way. However, on the way home from…
- A New Way To Gut Your 6th Gen Exhaust Just started this mod last night. Got to fiddling around in the garage and wondered how hard the exhaust would be to lower and get the heat sheilds off to do this mod. Next thing I know I've got the cans on my workbench…
- Looking for soft side case suggestions for 6th gen [image: Posted Image] I've had a good experience with Nelson Rigg.
- Leo Vince or WTwo Brothers for 6th Gen VFR? Awesome! Thanks for the pics too, I see how the kit works now. On every other bike I've done, it required cutting and the kit was only a slip on with a small midpipe. This makes much more sense now that I see it. Now…
- Leo Vince or WTwo Brothers for 6th Gen VFR? [image: View Post]Bthomas, on 05 April 2010 - 08:37 PM, said: [image: View Post]JayDog2006, on 05 April 2010 - 04:14 PM, said: [image: View Post]Bthomas, on 20 February 2010 - 01:37 PM, said: [image: View…
- Leo Vince or WTwo Brothers for 6th Gen VFR? [image: View Post]Bthomas, on 20 February 2010 - 01:37 PM, said: [image: View Post]blackbrainedjohnny, on 20 February 2010 - 12:54 PM, said: I am wondering if there are any advantages or disadvantages between the two. I…
- Peg Lowering Blocks I'm interested too. I'm 6'4". Long rides get a little cramped sometimes.
- Rebound Dampening Question Hi all. Just joined the forum and I got to say, there's a LOT of info here. But I wasn't able to find one thing I was looking for. Where exactly is the rebound/dampening adjustment on the 6th gen rear shock? I can't…
- Benefits of Power Commander on stock 6th gen? I'm curious, would adding the PC (thus richening the mix) cause the engine temp to drop a bit? It's always been my experience that leaner means hotter.
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.