VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 19583

Hyofighter

61 posts recovered 2 threads started First seen 4 Apr 2010 Last seen 15 Dec 2013

Threads started

2 in the archive
  1. A different wheel option Hyofighter 15 25 Mar 2011 13 Apr 2011 Hyofighter · 25 Mar 2011 – 13 Apr 2011
  2. My 95 v4 fighter project Hyofighter 131 4 Apr 2010 31 Mar 2013 Hyofighter · 4 Apr 2010 – 31 Mar 2013

Recent posts

Last 50 of 61
  1. My 95 Vfr750 Project 15 Dec 2013 14:05 good to see she is starting to come along there grasshopper
  2. My 95 v4 fighter project 30 Mar 2013 14:16 You got it apexandy . Seb compression was achieved today via strapping zero concerns to report
  3. My 95 v4 fighter project 29 Mar 2013 12:35 I havent had any dramas as of yet for clearance but it was just a concern I had now I feel better about it now
  4. My 95 v4 fighter project 29 Mar 2013 05:43 mostly just ground clearance as well aswell as getting the fork caps away from the bars , some of the roads around here and bridge crossings and rail crossing when taken at speed have me worried about clearance under…
  5. My 95 v4 fighter project 23 Mar 2013 14:30 pretty close but there is the heat sheild and a 10-15mm gap , after a run this arvo all seemed fine , good skid on the spot with no air flow might be a different story but i never do that [image:…
  6. My 95 v4 fighter project 23 Mar 2013 13:35 cheers man
  7. My 95 v4 fighter project 23 Mar 2013 13:23 so i liked the mx bars and they were comfy especially for that trip over east to the drags but i still wanted flat bars and after fitting the ones that werent wide enough to the dirt dragger i really liked the look and…
  8. 94 Cafe Project 27 Feb 2013 14:46 that bike is looking mint , good work , watching this one closely
  9. Winter Project #2 - Suspension Upgrades 10 Feb 2013 14:25 how much longer is that rear shock ?? i remember reading some where that people used a shim in the top mount of the cbr shock to give a little more height or to level it out im not sure , only ask as im about to swap…
  10. My 95 v4 fighter project 10 Feb 2013 11:54 cool will have to keep an eye out for some of those well im well stoked to show yas this , front page of the bible [image: 19015_10200266580287819_1873454643_n.jpg]
  11. 94 Cafe Project 10 Feb 2013 11:49 the oil cooler lines on mine just the rubber hose but with some heat sheild sleeve over it it has been trouble free for the last 10000ks , even a few skids with hot pipes and no air flow havent caused any concern so far…
  12. My 95 v4 fighter project 22 Sep 2012 12:51 cheers fellas , ill let ya know about comfyness tommo got a bit of a ride on headlight wrapped today with some of that 3m carbon i had left , saves painting it for now i spose [image: Posted Image]
  13. My 95 v4 fighter project 21 Sep 2012 15:44 no i hadnt ,could work , but i did think about the carbon wrap i think i have some still left over
  14. My 95 v4 fighter project 21 Sep 2012 14:06 well its been a while since a update and a few things have changed , the bike has been faultless so far and has been a hoot to ride even a little to much fun sometimes [image: Posted Image] [image: Posted Image] [image:…
  15. to all the frankenviffers, this one's mine, VFR750RR 15 Oct 2011 10:24 not sure if this helps but this is a different wheel option i did and i too had to change bearings and do some some axle mods http://www.vfrdiscus...t-wheel-option/
  16. 97 vfr750 streetfighter project! 15 Oct 2011 10:15 nice work , is starting to come together now , and that wiring is bullsh$t up front hey i too chopped the crap out of mine and it still was a mess to get in there , keep up the good work
  17. 97 vfr750 streetfighter project! 18 Jul 2011 13:00 your getting there , i also was amazed in the weight of the stock tail , and even the front sub frame , im keen to weight the bike after im done see what kind of weight lose there was , keep up the good work
  18. 97 vfr750 streetfighter project! 1 May 2011 13:17 [image: View Post]lmsmx, on 01 May 2011 - 05:38 AM, said: Thanks! Are there any specifics out there on tail swaps? I looooooove r6 tails! And I love cbr tails! If you or anybody has knowledge to pass on lemme know! good…
  19. What is the distance of '07-11 CBR600RR front rotors 13 Apr 2011 14:28 not sure if this is going to help but honda do do some good interchangeable stuff , mine : 95 vfr750 cbr 929 front end and now a new model cb1000r front wheel , cb wheel was smaller axle 20mm 929 wheel 25mm axle , wheel…
  20. A different wheel option 13 Apr 2011 09:22 cheers fellas
  21. A different wheel option 11 Apr 2011 09:26 cheers but its along way off finished yet
  22. A different wheel option 10 Apr 2011 12:27 [image: View Post]cornercarver, on 27 March 2011 - 02:30 PM, said: Very cool, excellent write up. I am a fan of the cartoonish rear wheel and think a street fighter is the perfect application for it. Like Kevin, I would…
  23. A different wheel option 26 Mar 2011 01:09 [image: View Post]Rice, on 25 March 2011 - 12:29 PM, said: Very nice work. Not being too familiar with machining process, how do you machine the insides of the hub? Is the wheel installed into the spindle of the lathe…
  24. A different wheel option 25 Mar 2011 15:23 hiya ,some of you may have seen my build thread http://www.vfrdiscus...ighter-project/ in which i have done a wheel swap , it may not suit all but i thought id share as a few have done the fork swap , originally i…
  25. My 95 v4 fighter project 17 Feb 2011 14:20 so this is the plates i had made to mount up the tail id like to call them trial 1 as they are shit [image: 1290887832.jpg] [br] not very pretty but they worked so i re-made some new ones and at the same time moved the…
  26. My 95 v4 fighter project 12 Feb 2011 14:04 The Phantom She's got a nice bark... always helps bouncing it off the old corrugated iron! Looks like a tip from a HSV? I like the screen with the lights. Interesting to hear the HID didn't work out as I've been…
  27. My 95 v4 fighter project 12 Feb 2011 07:44 they do look small in the pictures but in the flesh there not to bad , but having said that when its on the road it the lights them selves may be crap in the output department so i may change them as i do do a bit of…
  28. My 95 v4 fighter project 11 Feb 2011 10:55 Dutchy Hyofighter haha i know its a brothel in there , hhhmm european brothels look completely different...... :laughing6-hehe: haha so true lowered the light and quickly drilled some more holes in the screen mount to…
  29. My 95 v4 fighter project 9 Feb 2011 15:26 haha i know its a brothel in there , cleaning the mess is the weekends task along with new oil and hearing it running again
  30. My 95 v4 fighter project 9 Feb 2011 15:08 well with xmas , holidays , the current storms , my trashed yard , and bulk overtime helping lineys with putting the powerlines back up all over now i can get back to it , i have a dead line id like to meet being 27th…
  31. Post a Pic of Your 4th Gen! 27 Dec 2010 04:21 how mine sits at the moment [image: Posted Image] [br]
  32. My 95 v4 fighter project 2 Dec 2010 09:28 The Phantom Hyofighter cheers phantom , for some reason i thought that the 954 front end was around an inch shorter , but i didnt take any measurements of the old front end , but thats cool always open to advice ,…
  33. My 95 v4 fighter project 27 Nov 2010 14:37 no offence take , thats exactly what i want , just your pic makes it look heaps better , nice work
  34. My 95 v4 fighter project 27 Nov 2010 12:16 todays effort , (and i mean effort , way to many rums last night) made the plate and spacers for mounting up the tail just need cleaning up painting , theres enough room in there i might fab up a battery box or use the…
  35. My 95 v4 fighter project 26 Nov 2010 08:47 is true with the sp tail i have heaps of room , the shock conversion might be a goer , might look into other brands and see if anything is close to the same length as the standard one , does anyone know the the length…
  36. My 95 v4 fighter project 25 Nov 2010 08:22 cheers fellas i appreciate the info , i was half thinking early in the piece that at the end of this project about getting the suspension setup by some one with the know how , im not a pro racer but id like a bike that…
  37. My 95 v4 fighter project 24 Nov 2010 14:15 The Phantom Hyofighter B4D80Y You will need to raise the forks up about 19mm with the 929/954 set up or the steering will be dangerously run wide on every corner. tell me more plz , Hey Scott, Kev is correct, running…
  38. My 95 v4 fighter project 24 Nov 2010 09:19 B4D80Y You will need to raise the forks up about 19mm with the 929/954 set up or the steering will be dangerously run wide on every corner. tell me more plz ,
  39. My 95 v4 fighter project 24 Nov 2010 09:17 VIFFER93 Hyofighter VIFFER93 Any concerns about the cooler being so close to the exhaust? Nice work. a few so im gonna work through my options , ill think of something . although there is a bit of a gap id like a bit…
  40. My 95 v4 fighter project 23 Nov 2010 14:29 VIFFER93 Any concerns about the cooler being so close to the exhaust? Nice work. a few so im gonna work through my options , ill think of something . although there is a bit of a gap id like a bit more
  41. My 95 v4 fighter project 23 Nov 2010 14:07 well for the oil cooler i couldnt find anything i really liked so i modded a powersteering cooler to suit how i wanted it to mount , im not sure if im keen on it but it is growing on me , might do something with the oil…
  42. My 95 v4 fighter project 14 Nov 2010 03:48 i did think about it for sure but i moved the lights as far back as i could as they are pretty long units and theres not alot of room back there , but once i tidy the wiring up and do some thing with the accelerator…
  43. My 95 v4 fighter project 13 Nov 2010 14:26 well bit more done , as i had a pile of parts in waiting was time to fit them up along with some paint [image: 1289709457.jpg] [br] [image: 1289731291.jpg] [br] i think the rearsets turned out awesome IMO [image:…
  44. My 95 v4 fighter project 4 Nov 2010 09:55 SEBSPEED Nice. How much were the reservoirs, and were did you get them? i ordered them through this mob http://www.extremecreations.com.au/ , ben who owns this company also owns this one http://www.bxpmachining.com.au/…
  45. My 95 v4 fighter project 3 Nov 2010 13:29 post mans been today [image: 1288867787.jpg] [br] [image: 1288890182.jpg] [br]
  46. My 95 v4 fighter project 2 Nov 2010 12:01 i did consider bolting them but passed on the idea , and beck could you imagine if i got all pear shaped and ya binned the bike with your fingers stuck in duster levers , :ohmy: but i do get what your saying with the…
  47. My 95 v4 fighter project 31 Oct 2010 06:07 Beck I dunno, but I think you lost me on this one after the addition of the brass knuckles.... :blink: It might be taking "street fighter" too literally, just too "Jesse James" for my taste...... What happened to the…
  48. My 95 v4 fighter project 29 Oct 2010 13:00 time for a update , last few months not alot been happening as was working my ass off and saving for our drivimg holiday east to deni and the rest of the time was prepping the ute for the trip , but now im back and is…
  49. My 95 v4 fighter project 7 Aug 2010 01:11 Sparky40sw Are you interested in selling the passenger hand grips? - even with shipping from Australia you cannot be as much of a rip off artist as my local honda dealer Thanks i would but i have sold everything i took…
  50. My 95 v4 fighter project 21 Jul 2010 09:13 hmmmm might remake the the standard sp2 subframe , might be the easier and neater option , cheers for the info

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.