VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 11250

Mac Morgan

21 posts recovered 1 thread started First seen 24 Nov 2009 Last seen 15 May 2020

Threads started

1 in the archive
  1. Coolant Type Mac Morgan 21 15 Mar 2014 19 Mar 2014 Mac Morgan · 15 Mar 2014 – 19 Mar 2014

Recent posts

All 21
  1. Rear brake locking up... rear center piston... FIXED! 15 May 2020 20:58 Marooncobra, 5/10/2020 at 4:29 PM 8200 Having now seen the cut away of the SMC I think when I do my brakes next I will strip the SMC down and throw it in my ultra sonic cleaner and hit it for a good ten minutes with a…
  2. Rear brake locking up... rear center piston... FIXED! 15 May 2020 20:53 8200rpm, 5/10/2020 at 3:40 AM So recently, I had the oh-so-common Honda (Goldwing, CBR1100XX, ST1300 and VFR800 combined braking system) rear brake lock up, dragging issue. The rear brake pedal felt mushy like there was…
  3. Wellnut install 30 Apr 2020 22:25 MaxSwell, 4/10/2020 at 1:25 PM If one looks at a virgin well nut it is longer and uncrushed. Put it in the hole you removed the crushed one from. When screwing the pan screw into the well nut after fitting the lower…
  4. Front end conversion - was yours worth it ?? 2 Aug 2019 12:18 Having owner a number of bikes during my life and still having a 98 gen 5 since 1999, I love to check back on the discussion site to see what’s going on with you all. The amount of time, money and effort spent on making…
  5. New 5th/6th/8th gen performance header now in production in USA 5 Apr 2019 18:21 I have a feeling that the oem bent flange shownin the photo above is probably the result of overtightening the the exhaust nuts. The torque is only 9 lb.ft. I’ve had my headers off a number of times for jet hot coating…
  6. Estimated labor to R&R transmission? 26 Mar 2019 21:26 If you’ve got the bike apart this far, go ahead and dive into the trans... they’re not rocket science and it’ll give you an education on how it works... most bikes these days have similar trans and shifting parts. When…
  7. 2007 front end vibration 9 May 2018 01:37 I’d check the forks and triple clamps for straightness as well as the frame.
  8. Rearsets for 5th gen.? 16 Aug 2017 01:10 Once upon a time Harris in England made rear sets for the gen.5 but they're as rare as hens teeth. Don't bother writing them, no longer made.
  9. Chain adjuster stuck... but only in one direction... 17 Jul 2017 10:17 Maybe time for a bit of lubrication? Never had a issue with either of mine.
  10. Trying To Revive A 1993 Vfr 750, Incomplete... And Flooded! 4 Feb 2017 13:13 Not sure where the bike came from but I've rebuilt a lot of carbs and a pair from an airhead BMW from Texas had a lot of dried brown stuff in the float bowls. Some of it comes from contaminates in the gas. If the bike's…
  11. Rear Brake Locking After Pressing Pedal 26 Apr 2016 17:11 Just a thought here but do you all ever look at the factory shop manual? It got all the routing info for cables and hoses. Also shows how to rebuild every component on the bike and is downloadable on this site. Most of…
  12. How Does The 8Th Gen Rate? Is It The Best Vfr Yet? 27 Mar 2016 13:25 Not sure what causes a gen 5 to have a "dangerous" front suspension or what a "just right" cornering position is. I've yet to find any anomalies on any of the VFRs I've ridden... other then first interceptor which I…
  13. Ultrasonic Cleaner 31 Jan 2015 00:02 Ummm... Ever try Berrymans carb and Parts Cleaner? Walmart, PB, Autozone, etc.
  14. Hard Rear Brake Pedal? Doesn't Stop Well. (I've Bleed The Crap Out Of It) 27 Aug 2014 03:29 Maybe it's time to spend a little more time on preventative maintenance. Don't know why you wanna be able to lock up your rear brake anyway!
  15. Denali Powerhub 2 Fuse Block Installation 18 Aug 2014 12:27 Not sure why we motorcyclists need so many fused circuits; maybe for the cell phone, nav, heated grips, battery tender, extra lights, 2way radio, stereo system? Maybe that's why so many batteries, RRs, wiring and…
  16. Wtf Is This? Gross Clutch Resevoir 9 May 2014 11:39 Here: Attached Images [image: image.jpg]
  17. Coolant Type 15 Mar 2014 17:12 What's being used for coolant?
  18. Removing Top Bolt On Rear Shock On 1998 Model 12 Aug 2013 10:31 I've done 2 rear shocks on VFRs. First one I didn't follow the shop manual and pulled the bolt in the clevis. Second one I lifted the tank... Much easier. Not sure what you don't understand.
  19. Doing A Body Count.... Update Nov. 29 Insallation begins 24 Nov 2009 22:47 With 2 VFR800, gen 5 in my garage and more than a few busted up pieces of plastic. I saw NICECYCLE's ad on line and decided what the heck, I've got a new SEARS Gold Card with a zero balance and a 24.9% annual rate and…
  20. Doing A Body Count.... Update Nov. 29 Insallation begins 24 Nov 2009 21:51 [image: View Post]Mac Morgan, on 24 November 2009 - 04:49 PM, said: [image: View Post]LostCosmonaut, on 21 September 2009 - 03:42 PM, said: So does anyone have first hand experience with these to say how good they are…
  21. Doing A Body Count.... Update Nov. 29 Insallation begins 24 Nov 2009 21:49 [image: View Post]LostCosmonaut, on 21 September 2009 - 03:42 PM, said: So does anyone have first hand experience with these to say how good they are or not? I'm very tempted but I worry about getting stuck with crappy…

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.