Member record · ID 25828
thor294
69 posts recovered 2 threads started First seen 2 Sep 2012 Last seen 7 Sep 2021
Threads started
2 in the archiveRecent posts
Last 50 of 69- 86 VFR750 Inner Panel Reproduction I need a set of these!
- Picture Thread I'm waiting for a RWB one ... :)
- 86 Vfr750 - Jetting Question I'll have to record it with the bike idling. Maybe its just a valve noise.
- 86 Vfr750 - Jetting Question The noise is from the engine not from the chain for sure. I noticed he said dancing on decel. Lol derp on my end. I've adjusted it before and the noise doesn't change. All that noise is from the engine.
- 86 Vfr750 - Jetting Question I'm gear driven though... I thought I didn't have a chain? [image: H86VFR750FA05.gif]
- 86 Vfr750 - Jetting Question Alright so im chasing chain noise? not valve noise? I'll inspect all but just want to make sure :P
- 86 Vfr750 - Jetting Question VFRBert Noisy valves means to much clearance. mening less valve lift, mening les air/fuel mixture, mening less bang in the engine Makes sense 100%. Valve inspection time! OEM plugs... Any other parts I should have…
- 86 Vfr750 - Jetting Question VFRBert Is the horsepower output as measured on the rear wheel, or is it corrected to crank horsepower. It should be more for a fine tuned rc24 I'm guessing RWHP? squirrelman With some intuition and careful tuning it…
- 86 Vfr750 - Jetting Question How can I tell if the jets in my bike are too big? I purchased this bike and it was already modded, but I was wondering if the jets on it are way too big. It pops a lot on decel, and the MPG is horrid (30-32ish?). It…
- 1986-89 Vfr750F Colors RWB is de best!!! :P
- Checked Out The 8Th Gen Today And.... My local dealer still hasn't gotten an 8th gen yet... so I won't really have my judgement till then. I've ridden quite a few bikes, but 3 different VFRs. 86 vf500, my current 86 VFR750, and an 07 RWB vfr800. Out of the…
- Checked Out The 8Th Gen Today And.... auggius thor294 I think they did good everywhere but the engine. I don't know why its so hard to just put some more ponies to the ground out of a beautiful sounding v4? How much faster do you want to go or need to go on…
- Checked Out The 8Th Gen Today And.... aye they use all the valves all the time. I've driven i-VTEC cars and VVT cars as well, and you can tell. but again, they need to smooth out the transition.
- Checked Out The 8Th Gen Today And.... VTEC is amazing on cars, because you essentially have like 4 different camshaft(s) in your vehicle. One for each driving mode (cruising, flooring it, etc. etc.) so I would leave it on. They just need to make it as…
- Checked Out The 8Th Gen Today And.... I don't know if 100ccs is necessary. With FI and all the technology, they should be well over their numbers. again, my 86 750 that is probably running too rich and has 40k miles on it pushes 90. 50 more CCs, FI,…
- Checked Out The 8Th Gen Today And.... I think they did good everywhere but the engine. I don't know why its so hard to just put some more ponies to the ground out of a beautiful sounding v4?
- Checked Out The 8Th Gen Today And.... http://www.vfrworld.com/tex_vfr/tech/meaning.htm In 1986 the "Focus" of the interceptor changed to a platform for Honda's Superbike hence the VFRxxxF which meant that is was still a street bike first but with the…
- 105Bhp in the end... the VFR needs more power :)
- 2014 Vfr Poll My 07 dynoed at 96hp on the same dyno as my 86 And that means? Until a run-in 8th gen is tested on that dyno not much. Real interest is comparison between the EU/World spec & US spec. Fast Bikes (UK) had their test bike…
- Aftermarket Pipes For Gen 8 Much better : [video: https://youtube.com/embed/rRTyGSqetsg?html5=1&fs=1] Thor294. Remus dyno charts in the video show more than 96hp. lol 104. the problem with this is, that you gotta have a reference point on the same…
- 105Bhp mello dude cug Rear wheel vs. crank. Manufacturer numbers are crank numbers, there is quite some loss in the whole drive train. Some bikes are closer to manufacturer numbers and some manufacturers are a more…
- 105Bhp cug Rear wheel vs. crank. Manufacturer numbers are crank numbers, there is quite some loss in the whole drive train. Some bikes are closer to manufacturer numbers and some manufacturers are a more conservative than…
- 105Bhp motor cyclist says 94.3 hp @ 10k RPM and 52.3 @ 8400RPM lol.
- Aftermarket Pipes For Gen 8 ^^ not bad... kinda close to mine [video: https://youtube.com/embed/MzC5U8-rAZQ?html5=1&fs=1]
- Motorcyclist Collector's Issue. Sept 2014. Heads Up. Just got the magazine in the mail... Haven't read it yet (I'm at work). Just scanned up the timeline and the "me and my ride". Why isn't the 86 RWB?!?!?!? Even though the white is cool, but still.. cmon!!! :P [image:…
- Cbr 650F Could This Be The Next Sport Tourer For Honda? Or The Perfect Bike? two different bikes. VFR is a much better "standard" bike than the CBR/F model. :) Far from perfect bike!
- But Why? Who's Going To Buy One? Nobody. Pathetic in the eyes of people who like power when they want it :) Hmm. Isn't it pathetic to buy a bike you know is not tuned for performance? I'm really not getting it. If you want more power, buy a different bike.…
- But Why? Who's Going To Buy One? Nobody. Pathetic in the eyes of people who like power when they want it :)
- But Why? Who's Going To Buy One? Nobody. my 2007 dynoed at 96 to the rear tire stock... 6 more than my 86. pathetic. 2007 Dyno: [image: LvK6EdY.jpg] 1986 Dyno: [image: qyAYQ.jpg] same dyno... the difference was I paid for the 2007 dyno. the 86 dyno was on free…
- But Why? Who's Going To Buy One? Nobody. Why? The VFR is not a performance bike. Never has been. The engine is great. If you need more power, get the 1200. That's what it's for. All this "more power on this bike, give it more displacement" makes no sense as…
- Motorcyclist Collector's Issue. Sept 2014. Heads Up. I agree, why buy a new model when you can get a 6th gen (in RWB if you want!!!) for a fraction of the price, fix the querks with it, and have a better bike? Honda needs to get their head in the game. my 86 made 90HP on…
- Gutted Stock Exhaust Too Loud I didnt know stock exhausts were only worth $100. yeesh I have perfectly stock exhaust from my 07 vfr800 if you are interested.
- 2007 Vfr800 Delkevic I had to grind my license plate a little bit on mine... No issues and it sounded sexy!
- Aftermarket Pipes For Gen 8 underseat exhaust please... so we can see that sexy wheel :P
- But Why? Who's Going To Buy One? Nobody. The 1200 is a fail... 6th gen is much prettier... anyway, don't think anyone has it yet...
- 2014 Updates For The 1200F? maybe we can get one for like $5000 at that point :goofy: honduh is losing their footing in the sport touring scene
- 1st Gen with CBR wheels. Post up pics and your experience with it After riding my vfr800 with radial tires and going back on my 750... I feel like I have to do this
- New Vfr800 Vtec Will Be Introduced At Eicma. :wacko:
- New Vfr800 Vtec Will Be Introduced At Eicma. If there is a RWB version... sign me up :P looks pretty sweet. +1 on the side exhaust though. under the seat would look mean
- What's A Supertrapp Worth? My bike has a full hindle stealth exhaust... hindle doesnt even make the muffler packing anymore.. waiting for pics from OP :)
- Are Vfr's Chick Magnets? My friend is a photographer, and one of her clients wanted to do a Wonder Woman photo shoot for Halloween.... I told them I'd come on my 86 RWB VFR750 as Captain America to take some photos... I'd have to lose my gut…
- New To Me 2007 Vfr800 Abs. Noob Question really can hear it in first... its normal :)
- 85 Vf1000R "bike In A Box" beautiful bike!!!
- The Full System That Two Brothers Should Be Making Right Now. (Video Teasers) wish I could get my hands on both sets... wouldn't mind being a guinea pig by installing both vs. stock and see what the dyno says
- The Full System That Two Brothers Should Be Making Right Now. (Video Teasers) $2500... might as well just save up and find a used torocharger lol
- The Full System That Two Brothers Should Be Making Right Now. (Video Teasers) I wouldn't put an alum sprocket on the back... bad news bears I feel like I've talked about this before on here. No one really makes headers for 6th gens? guess gutting my stock ones is the only "mod" Choices - Motad -…
- The Full System That Two Brothers Should Be Making Right Now. (Video Teasers) I feel like I've talked about this before on here. No one really makes headers for 6th gens? guess gutting my stock ones is the only "mod"
- The Full System That Two Brothers Should Be Making Right Now. (Video Teasers) so what I gathered from this is the motad headers are garbage, and these 2 bros are amazing? :P
- Givi V35 Sidecases - Anyone With Pics? you're selling the bags pictured? :O
- Vf1000F For Sale On Ebay Had a similar one on my vf500... aftermarket [image: 331673_10150350354443072_308359_o.jpg]
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.