Member record · ID 17864
ciprinakos
47 posts recovered 1 thread started First seen 15 Jun 2010 Last seen 17 Aug 2017
Threads started
1 in the archiveRecent posts
All 47- How to recharge old K&N filter The guy from the service shop in my city told me to use break disk cleaner - the filter will return to its original color:) Sent from my iPhone using Tapatalk
- What if I remove the catalytic convertor? My intention was not to make it seem that the riding is impossible but the well being on a cat exhaust is better. The difference can be observed while standing behind a car with and one without cat (running on…
- What if I remove the catalytic convertor? The gain from removing the convertor is not great comparing with the fact that you, and your passanger mostly, will get choked with the exhaust gases when stopped or going very slow on traffic. Due to an accident I have…
- Am I Crazy? Most Possbly Yes In case you do not know, the Toro supercharger kit is no longer available. Should you find alternative solutions, please let us know - a lot of people want it, myself included.
- 6Th Gen: Led Headlight Conversion ciprinakos No night time pic's of your headlight setup ? Here it is: [image: IMG_0570.JPG] My iphone 4 pictures suck but you can get an idea. Running in paralel with a stock VFR '06, his lights were almost invisible.
- 6Th Gen: Led Headlight Conversion Switchblade ciprinakos No night time pic's of your headlight setup ? ... Didn't think to make any. Will do soon. :)
- Heli Bars Vs Handlebar Conversion Vs ? LSL kit and a big rounded handlebar brought the grips really high and backwards that I can simply stay straight in the saddle - with a modified Vario-Touring screen I have no problems going 130km/h or riding 12 hrs with…
- 6Th Gen: Led Headlight Conversion I personally recommend getting projectors if you're concerned about light scattering. In the search for better light at night, I got myself 4 Bi-Xenon projectors in my '03 VFR so I can use either 2 or 4 Low at the touch…
- 6Th Gen: Gold Valve Install Question I did the drilling on the valves as instructed by the instruction sheet that came with the valves and it works great for me. The shimm arrangement was done as well as per RaceTech on-line calculations and the table…
- Front end conversion - was yours worth it ?? For me, Wilbers springs & RaceTech valves combined with a Wilbers rear (with separate reservoir) did the trick nicely. I got it set up acc to my needs & I'm happy. I will not look too soon for another fork upgrade. Last…
- 6Th Gen Huggers tbzep HighwayStar2009 Since installing the Competition Werkes fender kit on my '09, the road debris mainly flings up on the tail light and inside of the pipes. Once in a while I'll wipe off the little mud flap in front…
- Best tires for the VFR??? Updated 2011 I have Pirelli Scorpion Trail, made for Ducati Multistrada, and they are great for both road & soft off-road. Check this out:…
- Cool Tip: Replacing Tail Light Bulb... With Turn Signal Bulb :) After getting it out with some difficulty, to do it easy next time, don't forget to use a bit of grease on the rubber seal - at least that's what I did...
- Hid Projector Headlights Here's how it looks like - was using only the lower lights at that time - http://www.vfrdiscus...fest-constanta/
- Hid Projector Headlights They are a combination of Madhead & Acerbis ( http://www.louis.de/...tnr_gr=10019605 - http://www.louis.de/...tnr_gr=10019645 ) and they can't be used on stock bars because they are too short. I have a pretty large &…
- Hid Projector Headlights Here's my newly finished project. I kicked out the led strips. More picture sometime later (next week). [image: Headlights] Headlights I've mounted 4 bi xenon projectors with blue angel eyes and red devil eyes. They can…
- Hid Projector Headlights My project is still unfinished. I decided, when I'll start working, to ditch the LED strips. Just the projectors are good enough. I'm still waiting for one of the bulb's replacement (one was busted on first firing - bad…
- Fan Control - Choose To Turn Fan On Or Off Or Allow The Bike To Control Arri A conmutator to change fan rotation direction with led indicator (thanks to holleros) [image: wwXA7.jpg] The power/current draw will fry up your switch. Not sure how much is the amperage of the blower's motor but…
- Fan Control - Choose To Turn Fan On Or Off Or Allow The Bike To Control I have made this mod a while ago & is great in summer city's heavy traffic. You can see it (if you try a little harder) on the left side of the (black plastic) dashboard with a small LED on op of it:…
- Lsl Superbike Bar Conversion - 5Th Gen to our friend in Romania...Can't think of anyone here that has found it necessary to install a steering damper on a VFR...but from the looks of your mod list you will likely be the first. Sorry to disappoint but I can't…
- Hid Projector Headlights The answer is no, I did not get the HID harnes from you. I'm a seaman and last year, while going (regularly) to Hueneme, I got the agent to order the VFRness bundle for me. I received from the ebay seller that sold me…
- Hid Projector Headlights The most difficult thing was to fit all the wires, ballast and igniters under the fairing. Unfortunately one 4300K was busted so I need to find a replacement. I'll need to make a beam adjustment and I should be good to…
- Hid Projector Headlights ... project ... in progress ... (the dirty spots & splashes are dead insects from the week end ride) [image: post-17864-0-00929400-1366231048.jpg] [image: post-17864-0-72898100-1366231066.jpg]
- Lsl Superbike Bar Conversion - 5Th Gen There is only one downside - if you'll ever think of getting steering damper you'll be hard pressed where to put it. Otherwise this setup is much more comfortable. Cheers!
- Another Suspension Rebuild 2010 Vfr800 Vtec Question: "external adjustment caps in the front" - how do they look like and from where? I intended to get the internals grom an F4i to achieve rebound adjustment. Thanks.
- retrofiting a CBR steering dampener Steering damper will help in case of troubles. To me it happened to have a failure of the front tire valve. I was running with 140 km/h and experienced a sudden & heavy handlebar shake/tank slapper. Luckily I paid…
- Digital Gear Indicator for 6th Gen If you go for Healtech's Gipro, be mindful that is a different type for 6th gen before & after '06. That's due to the fact that on after '06 the connection is made directly into service connector (computation info is…
- Steel Braided Lines Here's how they look on my bike (I still need to muster the right mood to put also the rear ones...): http://www.vfrdiscus...-hel-brake-kit/ http://www.vfrdiscus...-hel-brake-kit/ Cheers!
- Any benefit to O2 bypass without a Power Commander or exhaust? It will get rid of the surging in lower revs, as the colleague said above but overall the consumption will slightly increase because now the ECU can't make the fine adjustments in the fueling due to no/false reading of…
- Steel Braided Lines I forgot to mention that for the brake and clutch hoses (the ones coming from the handlebars) I've asked them to be made about 10cm longer due to mounting of a high & wide superbike handlebar. They did it without any…
- Steel Braided Lines I have Hel and they are great. The kit comes with everything you need (including banjos and copper washers) except instructions on which line is which. Took me some time to figure them out but they are great. Not only…
- bike fine, turn on lights and dies I had a similar problem until few days ago when I've installed a VFRness and placed the headlight's on different circuits from the original (directly to battery via their own fuses). VFRness bundle comes with a second…
- 6th Gen Rebuild Project Good luck, lot a patience and full use of Service Manual which can be downloaded here on vfrdiscussion. Seeing your pictures surely brigs back memories. Due to back kissing a car behind at over 100km/h (60 mph) my…
- VFR 800 Vtec A Screen modifications "... adjustable deflector upside down ..."? How come? Can you post a picture, please? Thanks!
- VTEC suspension upgrade / overhaul. Thanks a lot. I'll study & try to have some fun with suspension when I'll get home.
- VTEC suspension upgrade / overhaul. Hi to all, since I was with work in US, I took the opportunity to get myself the Race Tech Fork Gold Compression and Rebound Valves. I got the package with some instruction sheets and a DVD. All nice and fine but when I…
- Front end conversion - was yours worth it ?? ggathagan ciprinakos Did anybody did the front end conversion on an ABS VFR? Preserving the ABS is what's keeping me from atempting the upgrade. From what i've seen on this topic all the modified bikes were non ABS. CBS…
- Front end conversion - was yours worth it ?? Did anybody did the front end conversion on an ABS VFR? Preserving the ABS is what's keeping me from atempting the upgrade. From what i've seen on this topic all the modified bikes were non ABS. CBS can be dropped ... I…
- Best tires for the VFR??? Updated 2011 Depends on the season and the roads you're going. In the image is a Pirelli Corsa RS
- 6th Gen (06+) Diagnostic Link Connector (DLC) pinout and signalling Hi to all, does anybody know if it's possible to make a DLC conector also on '02-'05 VFRs by wiring up the ECU's A30 & B19? The other two should be easy since the '02-'05 models are already using the same signal wires:…
- Police style crash bars Hi, anybody know where such crash bars can be found? :computer-noworky: Although I have crash sliders (home) made by duramid (a near steel strong plastic type) I would prefer to have some crash bars as the ones shown in…
- VTEC-SC... The SC kit is already quoted here: http://www.aaperf.com/vfrkit-gen6.html I will get one next year, hopefully :fing02:
- VTEC-SC... Thanks! It's actually not a very big deal. I need to replace the front suspension tubes and the headlights. I was running with some cheap fiber glass faring & I have the originals intact. Otherwise, wearing a full…
- VTEC-SC... I've just crashed my VFR :wacko: so i will delay the charger kit. I was so looking forward for it... :pissed:
- VTEC-SC... Looks great both the bike & the charts. I'll have 2 start stack up the $ & by autumn to get one kit 4 myself :bliss: I don't think the ABS's electric wires/harness will be a problem.
- VTEC-SC... [image: View Post]VifferDude, on 16 June 2010 - 12:42 AM, said: The oil preassure that activates the VTEC pin is controlled by a solanoid which is "electronic". I've been waiting forever and a day!. The timing of this…
- VTEC-SC... [image: View Post]toro1, on 04 March 2010 - 02:17 PM, said: Now as far as VTEC is concerned, I'm still not sure it will even be an issue with the performance of the bike. I have overlaid similar dyno charts on top of…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.