Member record · ID 19860
Cogs69
23 posts recovered 1 thread started First seen 14 Apr 2010 Last seen 28 Sep 2010
Threads started
1 in the archiveRecent posts
All 23- Finally done. Moar pics. :cheerleader: Been looking at doing something similar here. :fing02:
- Sprocket Trouble Just did sprocket and chains on my '02, the new rear sprocket had no recess.
- Scala Rider lookalike No weekend updates? :blush:
- Is this an elitist stance? Most of the people I know around me that ride are all harley riders. They all wear that super protective bandana and the leather vest of steel to protect them. I still preach gear, and I still get ragged that there is…
- Heating / Cooling [image: View Post]danmurphymn, on 25 May 2010 - 10:20 AM, said: I know there are cooling issues on my 6th gen and I wanted to double check to see if this is normal/bad or nothing at all. Last week, I got stuck in…
- Exhaust Modification-muffler Bypass: Pics Added Well I bought a dremel, (2) porter cable hole saws 1", and went to work. Drilled the first one out till the pipe was free. Went to work on it with the dremel then looked closely and realized that it was not going to fit…
- Local Hillbilly Ran Me OFF THE ROAD! Wow sorry to hear that. I haven't been on here long, but didn't you just finish getting the bike together? Sorry man, glad to hear it didn't go any worse.
- Sena SMH10 Intercom system...anybody have one? [image: View Post]netinfiniti, on 15 May 2010 - 01:13 PM, said: [image: View Post]2thdr, on 15 May 2010 - 12:51 PM, said: Anyone have one of these yet? Web bike world is falling all over themselves recommending it.…
- Fan Switch Temperature Options [image: View Post]coderighter, on 26 August 2009 - 08:00 PM, said: The fan has a problem, sort of. Honda decided that it would be better that the fan pull cold air in from the outside, which is the opposite of air…
- Dremel question... For cutting, I use a high speed air tool. Works wonders on grinding and cutting. Only problem is I wish it was possible to get wheels small enough to go inside the exhaust for a gut.
- Aftermarket fairings That sucks that it broke, I'm wondering if some epoxy with some sort of backing material for stability might work. I have fixed fairings this way before. It actually sands down well for painting as well. Luckily that…
- Would anyone be interested in a mod that would remove the VTEC system? [image: View Post]vanion2, on 03 May 2010 - 10:13 AM, said: The VTEC in the cars vs the VTEC in the VFR are not the same thing. The B16 runs the 4 valves all the time. At VTEC there is a change in the cam performance.…
- Would anyone be interested in a mod that would remove the VTEC system? I rode in a buddy's CRX with a B16 swap in it. The B16 is a vtec motor and he didn't have the computer for it yet and set up the vtec on a toggle switch. The car ran like crap in the lower rpms if you turned it on early…
- Motorcycle Training worthless It is the same as drivers ed for cars. Teaches you the basics, but Drivers Ed for cars doesn't teach you how to react at high speeds either. Training can not fix ignorance, immaturity, and bad decisions. If those were…
- An interesting survey... [image: View Post]Veefer Madness, on 22 April 2010 - 11:10 AM, said: Just an observation but, you American folks sure seem to be wary of the erosion of your rights and freedoms.... Maybe we Canadians can learn a lesson…
- An interesting survey... I think the ABS comments are misleading, the types of bikes ABS is available on are not the types of bikes most Squids target. Of course ABS bikes are going to have less accidents, as well as sport touring bikes, and…
- Women's Jacket Suggestions [image: View Post]y2kvfr, on 21 April 2010 - 11:52 AM, said: My GF just picked up a first gear jacket from NewEnough for $40. This, but in gray/black She's quite happy in the small 1 hour ride we did last night at 58�F…
- Women's Jacket Suggestions [image: View Post]Rice, on 21 April 2010 - 11:40 AM, said: Remember, that she has to look good and it's a big deal to her. It the jacket doesn't fit this criteria, you've wasted what little money you had. +1 on that, no…
- Introducing... I really like what you have done with it. That tail makes me miss my old 900RR. Good job with the bike. :fing02:
- First mod to the VFR1200F I know videos don't sound exactly like it does in person, but it sounds like a weed eater with the string popping the guard. I'm not a fan of the sound. But also, i won't knock him for trying something out. Someone has…
- Exhaust gut [image: View Post]Goosechef, on 19 April 2010 - 03:51 PM, said: I went in with the drill bit technique and like the change in tone. The only trouble is there is a rattle. I think there is a small piece that has settled…
- Exhaust gut I am limited to what I have available to me in terms of the exhaust guts I have read on the forum. I was looking at the tools I have to my disposal and was wondering what the minds on this forum think about this…
- New member and new VFR Interceptor [image: View Post]pazzo, on 14 April 2010 - 09:54 AM, said: New Sargent seat came in. I ordered on Sat and rec'd it yesterday. It's a good looking seat and seemed very comfortable on the hour long ride I was able to…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.