Member record · ID 21604
Crewwolfy
59 posts recovered 6 threads started First seen 14 Jan 2011 Last seen 27 Oct 2021
Threads started
6 in the archive- FI Faults..... Crewwolfy · 25 Mar 2021 – 27 Oct 2021
- Looking For A Recommendation On Summer Gauntlets Crewwolfy · 29 Apr 2015 – 15 May 2016
- Key Turns, Nothing Happens Crewwolfy · 29 Mar 2014 – 7 Apr 2014
- 2014 Crewwolfy · 29 Dec 2013 – 29 Dec 2013
- Reinforcing Thinner Fairings? Crewwolfy · 7 Mar 2012 – 3 May 2012
- Chicagoland? Crewwolfy · 4 Sep 2011 – 30 Dec 2011
Recent posts
Last 50 of 59- 5th Gen Model Year Differences Currently looking at a 2000 model with a stripped spark plug thread.. Are the heads and/or engines interchangeable from 98-01, or would I need to stay on the same side of the mid-model upgrade if I wanted to replace the…
- FI Faults..... Apologies for the long silence. I managed to successfully adjust the valve clearances, but bought another bike to ride during that work. Recently sold that bike, so back to focusing on the VFR. @Grum much thanks for the…
- FI Faults..... Hi all, I have a '99 viffer that lived a hard life before me. I can't say it's been easy with me, but I've put another 40k miles on with no drama. And no valve clearance checks. So I'm tackling that now, and thought…
- Anyone In Chicago? Or Deteoit? Ha, sorry, missed this. But don't worry, not many good roads in Chicago. Less about the twisties, more about what's along the side of the roads.. Or something..
- Led Headlight Install - 5Th Gen FWIW, I picked up a pair of headlight modules (the original style of this post), and one of the modules was stuck on high beam. Contacted the seller, and I'm getting a full refund and keeping the parts, so no loss. May…
- Led Headlight Install - 5Th Gen Charging system on a VFR? Those are never anything but perfect... :P
- Led Headlight Install - 5Th Gen I'm seeing 80w LEDs available. Pretty sure I installed high wattage headlights into my econobox as a teenager and fried some shit. Is it safe to install 80w LED headlights into the Viffer?
- When You're Getting Deeper Into The Motor Than You Planned... OEM coolant hoses are reasonably cheap. I'd replace the hoses that are cracked and any others that look like they are on their way out. Clean the mouse nest out, fix the wiring, put it back together, and enjoy. This is…
- Looking For A Recommendation On Summer Gauntlets Hmm, good to know. I don't want to cheat.. :tongue2:
- Looking For A Recommendation On Summer Gauntlets Hey all. Looking for a recommendation on some summer gauntlets (bet you couldn't tell from the title). I have nothing specific in mind, but the knuckle guard should be present, and a palm slider preferred. Would be…
- Advanced Rider Training, Why Don't You Take It? Two big reasons: cost and location. I'm a riding instructor, and value the benefit of education. One of the reasons I teach is because if improves my own riding. (The other reason is because I enjoy telling people what…
- Looking For Dimensions On A Delkevic Midpipe I have Delkevic headers on my 5th gen, same measurements. Stock muffler fits just like it did on stock.
- Good Places To Ride From The Chicago Area Galena area and north can be pretty nice. I'd suggest NOT riding around in Wisconsin after dark, though..
- Vfr Specialist Mechanics In Chicagoland I've got a 5th gen, but with cooling system and exhaust issues. However my riding instruction school's having an intermediate class day May 4th. I'd definitely recommend taking the class. I'll be there, as well as a…
- Vfr Specialist Mechanics In Chicagoland I've got a 5th gen, but with cooling system and exhaust issues. However my riding instruction school's having an intermediate class day May 4th. I'd definitely recommend taking the class. I'll be there, as well as a…
- Delkevic Slip-on for 6th Gen I'll be picking up a set of Delkevic headers for a 5th gen. Anyone have any thoughts on heat wrapping these? I've heard that the tape actually locks in moisture, but if they're stainless, does this matter? Looking more…
- Post your Voltmeter mount pics That looks incredibly difficult to read while riding, but I imagine it's easier than it looks...
- Key Turns, Nothing Happens I don't know why people remove the side stand sensor, unless it is indeed broken. But I've bought two bikes, and both have had the sensor removed. I've had a couple butt-clenching moments because of that, but not…
- Key Turns, Nothing Happens So after some help from the Mad Scientist, and some fiddling of my own, it turns out the ignition module cables cracked at a bend. Cut the wires, soldered in replacements, heat shrink tubing, electrical tape, and some…
- Key Turns, Nothing Happens Noted. I'll check this next. Thanks.
- Key Turns, Nothing Happens Ah. Thanks, Mad Scientist! I've removed and reinstalled the ignition module, so I'm intimately familiar with this connector. When the key is in the ON position, I'm getting low ohm continuity between two of the plugs.…
- Key Turns, Nothing Happens So I'm seeing that all three of these circuits should complete with the key ON. How do I accurately test this? Attached Images [image: Screenshot_2014-03-30-14-18-28.png]
- Key Turns, Nothing Happens Sorry, 5th gen. The side stand switch was removed by previous owner. I'll take a look at the circuit.
- Key Turns, Nothing Happens Key switch is showing a complete circuit. Just checked fuses. All look good. Are there fuses not near the battery? Tried jumping from car (off), no change.
- Key Turns, Nothing Happens Thanks guys. I'll check the fuses again, then off for a new battery. Ah, missed page 2. Key switch looks good, getting a circuit when ON.
- Key Turns, Nothing Happens Unfortunately I can't perform a load test on the battery, as I can't get a load to it, and the local AutoZones don't perform such a test on motorcycle batteries. It was kept in the apartment. I don't believe the side…
- Key Turns, Nothing Happens Yeah, fuses are all good. Battery was last used before winter, but was indoors on the trickle charger. Multimeter reads 12.7. Ground looks fine, but will continue to investigate there.
- Key Turns, Nothing Happens Forgive the brevity, posting this from the phone in the garage.. Turn the key, nothing happens. Clock works, but no headlights, instruments, fuel pump, etc. Battery is good. Pulled and reinstalled ignition module over…
- 2014 Anyone planning a trip for the new year? Cabin fever is already setting in. Need to plot a course for the new year...
- Cell Phone Mount Wear some headphones, set your phone to navigation, toss it in your pocket. You can run another cable from your phone to a charger while it's in your pocket. If you like, put a map in the tank bag pouch; otherwise,…
- Undertail Exhaust On A 5Th Gen - Need Help Oh yes, I've read through that post. Huge help. Just wanted to get those measurements down (perhaps I missed them in your original post).
- Undertail Exhaust On A 5Th Gen - Need Help Interesting.. I have some maths to do.. Thanks a bunch for the quick measurements, Canuck!
- Undertail Exhaust On A 5Th Gen - Need Help Know off-hand what they diameter of your muffler is? Or if I can be even more annoying, the minimum clearance between the tire and the muffler?
- Undertail Exhaust On A 5Th Gen - Need Help Very cool, Cap'n. While we're on the subject, aside from aesthetics, is there any reason to (or not to) go with a particular muffler setup? I most often see dual mufflers employed, but from a style perspective, I prefer…
- What Do I Do?! FWIW, my rear Shinko lasted about 10K miles, the front about twice that (1 & 2 years respectively).
- Left Side Mirror Became Really Loose I can't tell from the photos, but those may be Darth Bling's GSXR mirror mounts, in which case the pivot bolt is a giant phillips-head bolt. If so, use a slotted screwdriver on it to avoid crushing the wires -- you'll…
- Apology To My Bike. My bike gets the cheap fuel, 87 octane. Save your money on fuel, put the savings toward tires. (Hint: it's all marketing tricks.)
- What Kind Of Mpg Do You Get? I was getting 45 to 48 mpg until I got a speedo healer...now 40 to 42... Geez, how much does that thing weigh?! :)
- What Kind Of Mpg Do You Get? I normally average 35-40 mpg, though it's mostly city miles.
- What Do I Do?! I've heard good things about the Dunlop Q3s, and the price is very reasonable. I run Shinko 009s on mine atm, but will be upgrading next year. Shinkos are fine, Kenda I assume are ok, but you only get a few square…
- Chicago-Ish Vfrd Meet Up ? Luke's is pretty cool. Worth hitting once or twice a year. As for events, try the link below. There's little indication of what's a good meet vs. a lame one though.. http://www.chitownmeets.com/main/
- Vfr848Rr Anyone ? In general, I'm not a fan of seeking moar powah out of a bike that isn't first-and-foremost designed for the track. That said, I'm a huge fan of hobbies that aren't 100% logical. I like the amount of research and…
- Reserve A 5Th Gen Solo Rack From Kanadianken Might I suggest posting a heads-up thread in the 5th gen section? I don't come to the luggage section often, only happening upon this thread by chance..
- Reserve A 5Th Gen Solo Rack From Kanadianken Oy! Motosensation ruberducky Higgin Munky Primo Ab-Oz ? Crewwolfy
- Reserve A 5Th Gen Solo Rack From Kanadianken Put me down as #8. Hell, if we get close enough, I might take two. Someone's always looking for a KK Solo rack after he's finished a batch. (Ask me how I know.) Motosensation ruberducky Higgin Munky Primo Ab-Oz ? SinNh…
- Hid Projector Headlights That looks like one excited motorcycle! Nice job!
- Windscreen Upper Cowl Cover A Pita To Install As much as I love my VFR, I have a feeling my next addition to the stable will possess LOTS less plastic. The fairings in general are a PITA. As previously mentioned, install all the screws loosely, tightening once all…
- Led Install W/stock Flasher, Faster Is Better? One reason to add the resistor is the original reason for the quick flash: to let you know when a blinker isn't functioning properly. While the bulb likely won't burn out, if a wiring error occurs, you'll know…
- Fan switch mod Excellent idea you two. I imagine this'll help in Chicago traffic as well. Do you have any sort of wiring diagram to toss up here for us less knowledgeable types?
- Reinforcing Thinner Fairings? Hey all. I have one of the thinner Chinese replacement body panels for my VFR. (To be specific, tail section for 5th gen from another user on here (and I totally like it man!).) Anyway, it does already have a small…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.