VFRDiscussion ARCHIVE / READ-ONLYREAD-ONLY

Member record · ID 7956

Stealth

34 posts recovered 5 threads started First seen 17 May 2010 Last seen 27 Jan 2011

Threads started

5 in the archive
  1. Tail light bracket Stealth 1 27 Jan 2011 27 Jan 2011 Stealth · 27 Jan 2011 – 27 Jan 2011
  2. Y2K E-marked non OEM Mirrors Stealth 14 28 Dec 2010 13 Jan 2011 Stealth · 28 Dec 2010 – 13 Jan 2011
  3. Speedo Healer Stealth 1 21 Dec 2010 21 Dec 2010 Stealth · 21 Dec 2010 – 21 Dec 2010
  4. Is a big bore kit still available? Stealth 8 27 Jul 2010 7 Aug 2010 Stealth · 27 Jul 2010 – 7 Aug 2010
  5. Opinions Please Stealth 2 25 Jul 2010 25 Jul 2010 Stealth · 25 Jul 2010 – 25 Jul 2010

Recent posts

All 34
  1. Tail light bracket 27 Jan 2011 13:14 I know some folks have fabricated a bracket to support the tail light which reportedly prevents the tail fairing cracking up. Does anyone have an pictures of one? I've never seen one and not sure where to start to…
  2. So if it's pouring fuel... 4 Jan 2011 04:56 I had this problem on a recent rebuild. It was obvious which carb it was. Turned out the float chamber gasket was not seated properly and it was leaking through that.
  3. New South Whales 4 Jan 2011 04:24 Yeah the whole centre of Qld is flooded. The family and i are stuck in Brisbane until we can get through. I was looking at the flood map to see if we could drive around it and we could BUT; We'd have to drive down into…
  4. Y2K E-marked non OEM Mirrors 4 Jan 2011 04:15 $87 on $71 of parts! Same goes for small light stuff. I looked at a small led volt meter, size of a match box and they wanted $35!
  5. Y2K E-marked non OEM Mirrors 28 Dec 2010 22:44 I checked those and as always ATM they want more for freight than the item is worth! Puts my cost near the $200 mark and I figure I could get OEM for that. US freight costs are nothing short of ludicrous! Anon? Yeah,…
  6. Post a Pic of Your 4th Gen! 28 Dec 2010 22:29 [image: View Post]sruss67, on 28 December 2010 - 12:24 AM, said: Thinking of modifying mine as tried selling with little interest You're in Aus right. I'm sure I've seen your VFR on eBay a few times. What were you…
  7. Post a Pic of Your 4th Gen! 28 Dec 2010 01:45 red, red, red, and more red. I am so over red! Wait until you get a load of Marvin.... picking is plastics up this weekend. Stay tuned.
  8. Y2K E-marked non OEM Mirrors 28 Dec 2010 01:26 These mirrors are on ebay ATM. They claim to be high quality, E-marked, ISO factory etc but at that pice they have to be rubbish right? Just hoping someone has tried them and can report. So far I have learned that there…
  9. Speedo Healer 21 Dec 2010 00:06 Marvin (my gen4) has a smaller front sprocket.. great mod, but this makes the speed woefully optimistic. I've had a speedo healer on my '92 'blade for years to make the F4i dash work and it's been great, so I ordered…
  10. Michelin PR2 lovers, here is new rubber for you to test! 20 Dec 2010 23:45 [image: View Post]Cogswell, on 20 December 2010 - 04:48 PM, said: So many tires, so little time . . . :biggrin: It will be interesting to see what people have to say about their riding impressions in the dry. The…
  11. Key Mod 7 Dec 2010 22:34 Great! But how do you stop from loosing it? I've got mine solo, but with a soft key tag and a short clip that allows me to connect to my other keys when not on the bike.
  12. carb issues, I think 19 Nov 2010 03:34 Despite getting spark, you should still check the headers for heat. Start it up from cold and touch them with the back of your hand. It will become obvious as it warms up if one or more isn't firing.
  13. 750 fork options 18 Nov 2010 09:05 If you already the the parts... just give it a go.
  14. Did you or do you Name your bike? 22 Oct 2010 05:34 My '92 blade is called "Anon", since it's never given me a hint for a name. Anon is slowly moving to 'Anna'. 100% perfect, no issues, no drops, nothing but perfect service! She's now got 115'000kms and still my daily…
  15. Oops, I did it again. 22 Oct 2010 05:15 [image: View Post]rc36Honda, on 21 October 2010 - 10:08 PM, said: Serious accident, Monday afternoon. On my way up the mountain for lunch and I recall (very vaguely) seeing a truck on my side of the road. Next thing I…
  16. 5th Gen front brake lever "sag" 21 Oct 2010 01:56 Try this; Get a zip-tie, apply the front brake, and tie the lever back onto the bar, leave over night, but as long as possible. The theory is the air bubbles will rise to the top and escape through the res if you give…
  17. Back to Life 7 Oct 2010 04:27 And take it from me, you don't want to buying o-rings from honda! I've recently been kicked in the balls by them over carby o-rings/seals for a 4th Gen! Yes, I did try other suppliers for o-rings but none were close…
  18. Manual Engine Cranking 7 Oct 2010 04:11 Agreed. Sounds like you had the plugs our and were using the wheel? [image: View Post]dweese, on 06 October 2010 - 07:04 PM, said: How where you cranking it over? If your on a crank bolt or something that could come…
  19. 94-97 VFR 850RR 1 Oct 2010 07:31 You tell 'em! A bike like that deserves to be ridden, and if that means a stature and headlights so be it! That doesn't make it any less of a bike. Be a share to cut the failing for a light tho. But if you don't intend…
  20. Your Favorite VFR pic 30 Sep 2010 02:34 [image: View Post]Poncho, on 29 September 2010 - 07:18 PM, said: The newest of my fav pics. Awesome! Is that your bike? Any shots from other angels?
  21. 94-97 VFR 850RR 30 Sep 2010 02:21 [image: View Post]The Phantom, on 28 September 2010 - 01:25 PM, said: Also, and this is the big news - Tom seems to have confirmed that CBR929 pistons will go into the VFR motor with an overbore, which is a question…
  22. Ditching the coffins 28 Sep 2010 03:36 [image: View Post]SEBSPEED, on 15 July 2010 - 11:32 AM, said: You can use whatever you want, as long as the piston bore size is the same(marked on the underside of the master). Make sure the brake light /clutch switches…
  23. Is a big bore kit still available? 6 Aug 2010 02:37 Got a reply'' Quote Yes, the kit is still available, cost 550 inc shipping to Australia, kit comes with pistons, rings, pins & locks, you will need to use stock Honda gaskets & open them out to suit, these are custom…
  24. Is a big bore kit still available? 4 Aug 2010 01:12 Hrmmm TTS web shop isn't working, nor is their enquiry form. Sent an email manually.. not holding my breath.
  25. Is a big bore kit still available? 4 Aug 2010 01:09 Yes, I would get more bang for buck with the super but this is for a 4th Gen... no kit available. Next best thing... big bore kit. I wonder what they are worth.... think I'll drop them a line.
  26. Is a big bore kit still available? 27 Jul 2010 08:54 Probably not going to buy one... would like to tho and you just never know. Anywho I would like to find out if it even exists still.... since that would cure my desiring of it. And if it does, how much is it... which I…
  27. group buys on helibars 27 Jul 2010 03:18 I see they aren't interested until November.... but I am interested. What about a GB on convertibars?
  28. Helibars 26 Jul 2010 11:53 Who makes them? Helibars. No, not adjustable other than they will freely rotate around the fork. http://www.helibars.com/
  29. Opinions Please 25 Jul 2010 06:41 I'm painting my Testarossa... and have after much deliberation decided on a colour... but; I'm going to use the metallic dark grey the AU Ford Falcons used (here in Australia) called 'Metiorite'. I've decided to paint…
  30. Finally Scored an 8 Spoke Wheel for a Fair Price 23 Jul 2010 02:21 Well good on you.. but want to hear a sob story? There was a few weeks ago, a nice 8 spoker listed on ebay (Australia). Anyway, bid was just over $100 and I thought I'm gonna have me that wheel! I planned to bid in the…
  31. RV4? 21 Jul 2010 00:50 kostritzer That statement is going to require some pictures my friend! There's a popular saying on this site "without pics, it doesn't exist!" Well that's right... no pics and it doesn't exist. :-P Except in my dreams.…
  32. RV4? 8 Jul 2010 04:55 Personally I am looking at fitting a 4th gen engine into a CBR900 frame. I'm making some headway and am in the middle of measuring up the CBR900 frame to see if it is possible. The CBR900 is lightweight, has sports…
  33. Generations of V4 supremacy 27 May 2010 02:28 Nice! I was thinking "Oh the barstool has an RC45!" Then it occured to me you have an RC45 & V12. Then I read your bikes list under your avitar... You have an RC45 AND an RC30! It's offical, I hate you! :tongue: But…
  34. Voltage monitor 17 May 2010 03:59 That was a while ago! I'd be guessing maybe 5 years. Only thing I didn't like about it was the edge of the relective coating where it had been removed for the meter wasn't sharp enough for me.

Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.