Member record · ID 72
spinalator
98 posts recovered 2 threads started First seen 13 Dec 2002 Last seen 13 Jun 2019
Threads started
2 in the archiveRecent posts
Last 50 of 98- Hello boys and girls! Hi there, been awol for 3 years, I thought I would swing by and see what mischief you have all been up to. Welcome new members and all you old duffers!
- We're back - woot! Good work people!
- Big H Issued A Recall On Vfr1200F And Vfr1200X Re:drive-Shafts My recall is done, and the shop was very fast.
- Recall Update I am in Canada, and told the dealer the VIN, he ordered the part, took 6 days to come in, I dropped bike off, and 2 hours later rode it home. Then we had 5 inches of heavy wet snow, since I live in Canada...
- Auctmarts Vfr1200 Fairing Kit Windshield Comparison I have a ZG touring and ZG double bubble. I am 6'1" with tall torso and the DB gives me some buffeting. I can not recall if it is worse than stock, since I have had it on for over a year. I was going to put the touring…
- Saddlebag Liners For The Vfr1200 I bought nonOEM for the vtech and they fit fine, 40 bucks for two and I use a soft carry on bag for the trunk
- Bigger Fuel Tank Interesting ideas.
- Vfr 1200 Motor In New Ariel Ace Motorcycle Interesting, first I have heard of this.
- 2014 Vfr800F - Diary However ... the bike drives like a poem.....much much better than 6th gen. Till now I was sure to buy a Triumph Street Triple but now I am completely confused. I like that! It rides like a poem...
- 2014 Vfr800F Test Ride Very interesting reports. I am curious to see how it is in other countries, since emissions/noise laws are different.
- Vfr All "adv'd" - Knobbies Mounted (Tkc80S) - Ultimate "do Everything" Ride? Good for you. I hate purists, they are so, umm, pure.
- Streetfighter Fairing Weekend Project Good work Seb.
- 2014 Vfr Coming To America! I hope they sell a lot of them, and then Honda will invest in the V4 lineup.
- Led Headlight Install - 5Th Gen Great, thorough and thoughtful write up!
- Vfr848Rr Anyone ? That won't buff out! ;)
- Ecu Re-Flash - All 4 Threads Merged We shall monitor your progress!
- New Vfr800 Vtec Will Be Introduced At Eicma. 10 pages before tomorrow...
- New Vfr800 Vtec Will Be Introduced At Eicma. Gorp Good God. I usually lurk to read up on tech and maintenance info for my bike. (07 RWB + 55K miles, purchased new in 2010). It is a fantastic sport-touring bike, (which means nessasary compromises) as most here…
- New Vfr800 Vtec Will Be Introduced At Eicma. mello dude The thing looks like engineering was forced to go through a big cost reduction exercise. <snip> Whoa - does the 1200 now become a 1st gen 12 and the new 800 become the true 7th? :goofy: It looks a little…
- New Vfr800 Vtec Will Be Introduced At Eicma. Earthshake YoshiHNS And if luggage isn't an option, bolt a 6th gen tail, luggage rack, and undertail exhaust? It looks to me luggage will be an option. Judging from the odd extension off the rear peg hangers and what…
- Rear Preload Adjuster Stiff / Frozen Up Here it is on FleaBay, buy it now, sale sale sale! [image: Screen Shot 2013-10-30 at 1.05.50 PM.png] or 1200 at pureperformance http://www.pureperfo...--12-VFR1200-F/
- Veefer Madness Welcome to the site. I don't mind the cursing, send it to me in a PM if you feel too sanitized! :) It is easy to lose 20 lbs, not much work to lose 35 lbs, but it costs a lot of time effort and $$ to lose 50+ lbs, from…
- Vfr8 Streetfighter Good luck with mounting, post up pics when you have it ready!
- Vfr8 Streetfighter My wife's civic had a fan that always ran as well, I started to think it was a Honda thing, haha.
- Bigger Fuel Tank Warchild added aux fuel on his blackbird on the passenger area. As far as skill, if Orange County Choppers can cut and weld tanks that do not leak, I am sure an auto body shop with any skill can do it. The guys that…
- Trackbike Build - From Scratch Good work, sounds like you are having fun
- Alternative Ram Mount System I think he needs a secretary for his bulk order. That is about 5 of us that want one now. :warranty: :wheel: :cheerleader:
- Bazzaz Early Dyno Results I have 300 km in the bike now and it is SO much more fun to zip around with now. If honda would have shipped them like this in 2010, and made a few minor tweaks, they would have sold a lot more bikes. I have not done…
- Alternative Ram Mount System I should get one too, not that you want this to be a business or anything, haha
- Bazzaz Early Dyno Results I have never done the dyno thing on a FI bike, so it was interesting. I am not sure what all the sheets were he gave me, they have lambda on them, these two are the initial and final result. The bike is a 2010 not 2011…
- Vfr848Rr Anyone ? So what were they doing to get 870? Bigass bore and thin sleeves, customs pistons?
- Thinking Of Trading Fjr Ae For V12 267 kg (590 lb) ( wet )
- Failed Final Drive/shaft Unless this is the 10th time we have heard of this failure (and I looked and can't find another), then this is not reflective of the entire brand, the entire model, or the entire universe, it is a mechanical problem…
- Cafe Racer... Whats Your Opinion? So far so good!
- Possible Servo Motor Removal Unit I unplugged the wire but am unsure why I need to remove be servo. Weight? errors? Causes vibration in pleasure zones? :)
- Vfr750-St "pan Dutchopean" I think it looks nice, well done!
- Vfr848Rr Anyone ? Steel liners, interesting.
- Possible Servo Motor Removal Unit Thanks! :beer:
- Possible Servo Motor Removal Unit Is this the exhaust servo you are talking about?
- Alternative Ram Mount System Very nice, I like it and will pay half of retail for one! ;)
- Vfr848Rr Anyone ? I bought Brian's Corbin seat for my 95 sometime in the early 2000's. I was considering the big bore and then moved to Ireland for a year and blew all my savings. Hopefully you guys can get this figured out, I am…
- Vfr848Rr Anyone ? This is a little OT, but this fellow has a lot of info on boring out CB750's, one of my friends used his info and bought a kit for some big bore projects. Web Nanny filters may not allow you to access his domain, lol.…
- Vnr? Wtf! Nr750 Replica Keep up the fine work! It is looking good!
- The eifel the mosel the ring and the prang pic laden How do you like the bike so far?
- Vfr848Rr Anyone ? Here is a 94-97 750 big bore on the dyno, he had a staintune high mount, Ducati rear wheel, and likely a jet kit: [image: post-72-0-81664800-1375382964.png] Different bike, 1995 750 torque curves: [image:…
- Vfr848Rr Anyone ? Not sure if any of the people here are involved in the thread over at bikers oracle in the UK: http://www.bikersoracle.com/vfr/forum/showthread.php?t=123379 Also here is the internet snapshot of Dynamo Humm from 10…
- Fork Service ? When you get the spacer post up some pics soaswe can see what it looks like! :fing02:
- Good Lord...what Have I Done? If you parted them out on EBay you would make 10 Grand, but I am sure what you will mold from that pile of parts will be much more priceless!
- Anyone Ever Rebored/overbored A 5/6Th Gen 242 revolutions per second is really quite fast. I have difficulty counting that fast in one second. :goofy:
- Anyone Ever Rebored/overbored A 5/6Th Gen Mohawk <snip> Or based on my existing tune of 107rwhp & using the same percentages above, then I'd expect to see 825cc=130hp or 848cc=140hp. Now that would be impressive :) I have a few tweeks planned for the existing…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.