Member record · ID 9759
SLO97VFR
103 posts recovered 1 thread started First seen 27 Feb 2007 Last seen 1 Apr 2011
Threads started
1 in the archiveRecent posts
Last 50 of 103- Question about 5th Gen Forks Those 2 bolts are not drian bolts but what hold the fork tube cartridge in place. If you are going to rebuild you forks you'll want to have 2 new bolts and washers to reinstall. Otherwise no need to mess with.
- Dealing with the rear shock I know the search feature sucks sometime, lucky for you I was one of the authors so here you go: http://www.vfrdiscus...__1#entry592851
- Will this work to cool my RR, or am I wasting my time I just keep mine immersed on liquid nitrogen, problem solved
- Easy fix? [image: View Post]sweet97, on 08 September 2010 - 08:03 PM, said: Noticed this morning that the light behind the fuel and temp guages on my '97 is dead - easy fix? Dave P. Yes, just remove both side panels, remove…
- High Mount Exhaust I have a nice Micron one that I may part with. Looking at $ 275.00 + shipping. Brian
- 5 th gen VFR You need to have your upper and lower mounts aligned with each other first. Then if the handle bars dont align you may have 1 or two bent fork tubes and possible bent triple. I doubt your frame is bent.
- How to flip the eccentric in a 4th gen Also this site has alot of good info too, sign up if your not already: http://www.bikersora...=eccentric+flip Normal position: http://www.bikersora...69&d=1047842956 Flipped position:…
- How to flip the eccentric in a 4th gen http://www.vfrdiscus...ms/page__st__30 And here I thought you would have been the guy to invent the flop :)
- How to flip the eccentric in a 4th gen World Superbike Racer Group:Forum Contributor Posts:466 Joined:26-October 03 Location:Sweden In My Garage::Francine - a 94 Track-Tourer Thank You's: 0 Neutral Posted 08 March 2006 - 11:56 AM BusyLittleShop, on Mar 8…
- How to flip the eccentric in a 4th gen The Phantom Quieta non movere Group:Volunteer Posts:3494 Joined:19-September 05 Location:Sunshine Coast, Queensland AUSTRALIA In My Garage::1994 VFR750 1995 VFR750 2001 Cannondale Super V 1984 CCM Autobike Signed Flaf:…
- How to flip the eccentric in a 4th gen [image: View Post]SEBSPEED, on 19 August 2010 - 06:22 PM, said: I remove the wheel, and then... (please fill in the blanks) Is it as simple as rotating the eccentric 180deg, then coming up with a new torque arm for the…
- RR Failure Again is there any cure for this? Might want to try the R1 conversion and make sure you got good connections at the battery post.
- Legality of modulating lights Flashing lights do attract drunks....Im sure you have seen the numerous videos of cops cars getting slammed into when they are at a traffic stop... I dont think the flashing lights help except the headlights to get…
- Givi Wingrack (the original) There is no bracket that runs above the tire unless you want to add a support brace they sell but not needed. You need the wing rack, 2 angle top pieces, top case mount, 2 brakcets the bolt to the grab handle bolts and…
- another undertail exhaust done Ok so where are the how toos? Id be interested in seeing more how you attached the tips. I like the look a bit better than my 600rr muffler. I have no idea how you got the 1000 muffler up there as the one I have is too…
- R1 Rectifier questions I helped a friend install one on his 98 and he seems happy. For my 97 I have the Honda fin unit and not had any other issues. I do carry a spare for long trips. The connections staying clean are one of the most import…
- Trouble fitting Givi WIngrack Well I think I have about $60.00 US dollars tied up in those pieces and if you buy me a one way plane ticket their, get me a job, girlfriend, place to stay ..... Ill just bring them with me.
- Trouble fitting Givi WIngrack I have a good subframe and footrest if you end up needing to replace. Otherwise it is straight forward to put on the rack as long as everything on the wingrack is mounted in the same holes on each side.
- New Blue VFR Ok I think your right, that Corbin seat has to go....to me....Heck Ill even give you a few dollars for her and if you need a stock seat, I have one of those too.
- New Blue VFR :lurk: :+1: .....
- WTB: want a carbon high mount 4th gen [image: View Post]timmythecop, on 09 November 2009 - 01:46 AM, said: or go here http://www.vfrdiscus...showtopic=55890 I have a micron high mount system but polished not carbon.
- Vfr Does Costco I know this one is real as he is a friend and Admin on the other site. He rode all over with this baby strapped to the rear. It was empty as he was returning it.…
- Corbin Seat Material $5.00 no slip material you can buy at the Hardware store. I got some of the thicker cargo no slip and use it on the passenger seat. 100% better as it keeps the girlfriend in her place! So far its the only thing that…
- 929/954 Shock Install (5th Gen) AndyJ I put my 929 shock into my 5th gen today. I used part of a 1/4" x 1 1/4" kart axle for the spacer, and made it 45mm longer than stock including the washer. Heavy and not as elegant as some of the other beautiful…
- Lost My &*%$^#@ Key When this happens to me I find it in the seat lock :biggrin: I also keep a spare wired behind the fairing.
- 929/954 Shock Install (5th Gen) Yep for my 929 shock. PM me with your payment needs, paypal etc.. Thanks Brian
- 929/954 Shock Install (5th Gen) I need a spanner as my tools were dropping out the back of my bike like some kind of bombing run this weekend. Almost took out 2 of the riders behind me. Let me know how much $$ for a good wrench. Also with the shock…
- Not In Cali Any More Your right the Cosmo is the worst by far. Thats why its getting a 93 Ford 5.0 Cobra motor in her soon. All smog in place as well and still get 3 times the power and a tenth of the emission that Rotary puts out. I think…
- Not In Cali Any More [image: View Post]turtlecreek, on Aug 18 2009, 05:54 PM, said: [image: View Post]SLO97VFR, on Aug 18 2009, 07:46 PM, said: Sometimes its about the bigger picture and doing less harm to the environment rather than worry…
- What Fork Oil Wt With F4i Internals Mod In theory and I wish I had this thought before.. Also its gonne be 3 weeks tilll I can comfirm.. I just not OCD with a tape measure, But I will play with the functionality of something till im satisfied its RIGHT.. You…
- Not In Cali Any More Sometimes its about the bigger picture and doing less harm to the environment rather than worry about an extra pound of emission equipment.....
- Not In Cali Any More Mine is all complete and it runs its best just as it is. DOnt mess with things that work.....ok most of the time thats true. You will be better off to loose 10lbs then remove it for any power gains.
- Diy - Powder Coated Rc30 Wheel. But best thing is the wheel has a nice pumpkin spice smell to it so no air fresheners are needed.
- Diy - Powder Coated Rc30 Wheel. [image: View Post]Kel, on Aug 16 2009, 07:56 PM, said: [image: View Post]SLO97VFR, on Aug 16 2009, 10:50 PM, said: What about the other side and parts that lay on the rack will have marks in them? Usually you need a…
- Diy - Powder Coated Rc30 Wheel. What about the other side and parts that lay on the rack will have marks in them? Usually you need a hanging point to eliminate any marks while the powder coating is in the oven and curing.
- Will Someone In La Help Me Setup My Suspension Bettter to ride to Pismo Beach and we will help you out with that then hit some good wine country roads.
- Vista Cruise Throttle Lock Install Question. [image: View Post]Ryanme17, on Jun 9 2009, 02:48 PM, said: I want to install a throttle lock on my new to me VFR. What is the handlebar diameter for the 6th gens? 7/8" or 1"? I thought it was 7/8" but the throttle lock…
- Gotta Good Deal, But Have ?'s Ditch the DONELOPS and get some Metz M3's and you will never look back! Oh and stay with the 170 unless you get an 5.5 8 spoke :)
- Tribute To The 25th Anniversary... http://i125.photobucket.com/albums/p73/BRIANGOAD/031109003.jpg
- For The Love Of All Things Holy Cant Anyone Keep Their Bikes Upright ! If you cant find a deal here, just shoot yourself : http://www.searchallcraigs.com/
- To Buy Back The Salvage Or Not? Offer 900 to buy it back, and get it back on the road and have 2 bikes. My friend bought back his 04 for I think 1300.00 then took the insurance money, bought a track bike and ebayed the parts he needed to get the VFR…
- Need To Have Pants Tailored I think it would be cheaper to go this route and just gain a few pounds: [image: Posted Image]
- Succesfull Twin Exhaust? You could put a Folgers coffee can on it and the V4 will still sound great !!!
- 80$ Undertail Teaser Couple of extra questions Did you keep the stock plastic shield/fender? Any melting issues if you did? What and how did you mount the cbr muffler to the sub frame? Thanks and pics are always welcomed ! Brian
- Succesfull Twin Exhaust? Had a set of those at first - HUGE and HEAVY! not really an option if you want them under the tail. They looked cool as a dual side high mount thou. Learn from my mistake but I did resell them locally.
- Succesfull Twin Exhaust? I have been working on an undertail exhaust for mine: http://www.vfrdiscus...p...c=51285&hl= I was going to put it up coming out thru the tail light but it would involve alot more cutting of the sub frame than I wanted…
- Thurn Motorsport Fairings And Tail Section With red Honda tank wings and red HONDA across the lower cowl and top it off with some nice red VFR labels for the mids....
- Single sided swingarms Still Sexy on the SSA...
- What Do You Want To Know About Chain Oilers? :cool: Thanks for your hard work and keeping us in the loop. Im curious about the outcome and your results will depend on which one Im going to buy. No pressure http://www.vfrdiscus...tyle_emoticons/default/smile.gif
- 929/954 Shock Install (5th Gen) Well Track day was yesterday and after trying to adjust my SAG settings on the rear shock it seems the 929 yellow spring is too soft for my 185 lb weight. Its at the top preload and still have 50mm. When I first put it…
Member profiles were not captured; this page is assembled from the posts that were. Post counts reflect what the archive recovered, not the forum's own totals.